-
Categories
-
Pharmaceutical Intermediates
-
Active Pharmaceutical Ingredients
-
Food Additives
- Industrial Coatings
- Agrochemicals
- Dyes and Pigments
- Surfactant
- Flavors and Fragrances
- Chemical Reagents
- Catalyst and Auxiliary
- Natural Products
- Inorganic Chemistry
-
Organic Chemistry
-
Biochemical Engineering
- Analytical Chemistry
-
Cosmetic Ingredient
- Water Treatment Chemical
-
Pharmaceutical Intermediates
Promotion
ECHEMI Mall
Wholesale
Weekly Price
Exhibition
News
-
Trade Service
In the aseptic operation workshop, it is often possible to see the staff wearing a special kind of shoe, which is a sterile high-barrel shoe
.
Although this kind of shoe can maintain a good sterile effect, but in order to have high-quality sterile high-tube shoes can be used for a long time, it is necessary to strengthen the management of shoes during use, and the following is to understand how to clean and disinfect sterile
high-tube shoes.
1, the use of reasonable cleaning agents and disinfectants to clean and disinfect the sterile high tube shoes to use the correct cleaning agent and disinfectant, usually can use the cleaning agent is laundry detergent, the concentration of 0.
1% sodium hydroxide; The disinfectant has a concentration of 0.
2% new Jieer solution and a concentration of 75% ethanol
.
However, it should be noted that disinfectants cannot be used for a long time, but should be used
in rotation of each disinfectant every month.
2, according to a certain frequency to clean and disinfect the cleaning and disinfection frequency required for sterile high-tube shoes used in different levels of clean rooms is not the same, for example, the sterile high-tube shoes in the D-class clean room should be cleaned after the end of daily production, thoroughly cleaned after the end of production every weekend, and disinfected the surface of the clean shoes with disinfectant; C-grade sterile shoes must be wet and disinfected with disinfectant every shift; Grade B and Grade A aseptic shoes should be cleaned and sterilized
after each use.
3, in accordance with the correct order to clean and disinfect sterile high-tube shoes every day after use should be put into the corresponding level of sink, in the sink to add an appropriate amount of cleaning agent to wet the sterile shoes, and then use a mercerized towel to scrub the surface of the shoes, if there is more difficult to clean the dirt with a brush repeatedly brushed, and then rinse with purified water for many times to no cleaner residue, dry after placed in the specified position for storage, backup
.
Because the cost-effective aseptic high-tube shoes can accept repeated cleaning and disinfection and sterilization, and have good anti-slip, which can protect the staff from slipping to falling, so many companies will purchase aseptic high-tube shoes to use
.
However, be sure to wash and disinfect
the sterile shoes in the right way during the trial period.