How much do you know about the sterilization process of the ultra-clean workbench?

How much do you know about the sterilization process of the ultra-clean workbench? As a device to replace the sterile room, the ultra-clean workbench is simple and convenient to use, and provides a relatively sterile operating table for the development of experiments
.

Ultra-clean workbench is a kind of local clean workbench with strong versatility, which is widely used in laboratories, electronics, LED, circuit boards, national defense, precision instruments, instruments, food, pharmaceuticals and other industries
.

The principle of the ultra-clean workbench is that in a specific space, the indoor air is pre-filtered by a pre-filter, pressed into the static pressure box by a small centrifugal fan, and then filtered by the air filter for the second stage, and then blown out from the air outlet surface of the air filter.
The clean airflow has a certain and uniform cross-sectional wind speed, which can remove the original air in the working area and take away dust particles and biological particles to form a sterile and high-clean working environment
.

The ultra-clean workbench is designed to meet the needs of the cleanliness of the local working area in the fields of modern industry, optoelectronics industry, biopharmaceuticals and scientific research and testing.
work environment
.

The sterilization process of the ultra-clean workbench: 1.
Turn on the power of the ultra-clean workbench, turn it on 40 minutes in advance, and turn on the ultraviolet germicidal lamp at the same time to treat the microorganisms accumulated on the surface of the operation area, and turn off the germicidal lamp after 30 minutes (the fluorescent lamp is turned on at this time).
) to start the fan
.

2.
Do not store unnecessary items on the ultra-clean work surface, so as to keep the clean air flow in the work area undisturbed; 3.
After the operation, clean the ultra-clean work surface, collect all wastes, and turn off the fan and lighting.
4.
Then turn on the UV lamp of the ultra-clean workbench, and after 30 minutes of irradiation and disinfection, turn off the UV lamp and cut off the power supply
.

 　　Pay attention to frequently wipe the surface of the ultraviolet germicidal lamp with gauze dipped in alcohol to keep the surface clean, otherwise it will affect the sterilization ability
.

 　　The ultra-clean workbench adopts an adjustable air volume fan system, and the light touch switch adjusts the voltage to ensure that the wind speed in the work area is always in an ideal state; the worktable is 304 stainless steel with a thickness of 1.
0, and the cabinet is a steel plate with a thickness of 1.
2.
The ultra-clean workbench is operated from The number of personnel is divided into single workbench and double workbench, and it is divided into conventional type, new type of push-pull and self-circulation type in terms of structure
.

 　　The above is the relevant introduction about the sterilization process of the ultra-clean workbench.
I believe that everyone will have a corresponding understanding of this after reading and understand the corresponding matters, which can reduce the frequency of problems and prolong the service life of the instrument.
helped
.