How important is safe operation to the stability of the number of granulators?

At present, people's attention to health is getting higher and higher, China's medical industry has made great progress, and the demand for pharmaceutical packaging is also very huge
.

Particle sizers play an important role
in removing and screening drug particles, improving drug quality and quality.

Not only that, it also plays a great role
in improving the packaging efficiency of drug granules.

The working principle of the number of granulators is: material packaging (tablets, capsules, pills) into the hopper, through the three-stage (or second-stage) electromagnetic vibration disc counting to separate the materials step by step, so that the material is orderly - the material enters the detection counter (each channel is a set of counters) - each channel has a number of sets of infrared transmission circuits and receiving circuits
.

When counting, the material falls freely into the detection channel, the infrared rays are blocked, can not be received by the receiving circuit, the counting pulse is generated, and the material is counted once - the material is counted through the baffle under the channel and enters the packaging bottle through the inlet port
.

When the counting quantity reaches the preset quantity (total number of products), the bezel under the channel closes to complete the bottle count.
The accuracy of the number granulator must not only achieve the accuracy of the counting after production, but also judge whether the granulator is "stable" in long-term production practice, which is also the core standard
for evaluating the quality of the granulator.

In short, the two main criteria for a granulator are accuracy and stability
.

The question is how to improve the accuracy and stability of the electronic granulator? Proper operation is key
.

1.
Confirm that the equipment is installed firmly
.

2.
The power supply must be reliably grounded
.

When replaced, plugged in, or unplugged, power off the main
.

3.
The power supply
must be cut off when maintaining equipment, cleaning the site, and cleaning equipment.

When cleaning parts such as medicine buckets and vibrating discs, do not splash the cleaning liquid on the
electrical components.

4.
When maintaining, cleaning and repairing equipment, unplug all connectors
.

It is strictly forbidden to pull on the wires
.

Grasp the joint and pull it out slowly so as not to cause a circuit
break.

5.
The inlet cable on the electrical installation plate in the chassis of several pieces is AC220V, please pay attention to safety!