Guangzhou furniture manufacturing enterprises pay attention! To complete the VOCs fix by June next year.

in order to win the blue sky defense war, regulate the Guangzhou furniture manufacturing industry volatile organic matter (VOCs) pollution control, in accordance with the "People's Republic of China Air Pollution Prevention and Control Law" and other relevant provisions, the Guangzhou Municipal Ecological Environment Bureau prepared "on the development of furniture manufacturing industry volatile organic matter (VOCs) pollution control work notice (draft for comments)," and issued on December 19, is now open for commentsThe time for comments will be from 19 December 2019 to 28 December 2019 (10 out of 10)notice applies to new and existing furniture manufacturing enterprises with the process of coating, spraying, dispensing, drying, etcthat produce volatile organic waste gas within the administrative area of GuangzhouThe notice shall be valid for three years from the date of publicationthe requirements of the rectification task include:(i) the cleaning of the original auxiliary material replacementfor wood furniture manufacturers, require the use of water-based, UV-curing and other low VOCs content coatings, the replacement ratio of more than 60%;, the water-based paint VOCs content limit should meet the "environmental mark product technical requirements water-based coatings" (HJ2537-2014) and other related requirements; If the country and the province promulgate new standards, all types of original auxiliary materials containing VOCs should meet the requirements of the new standards(ii) control of the production processthe original auxiliary materials containing VOCs in the production, packaging, transportation, transfer, use, storage and other processes should be kept closed, the use of the process with the open, after use should be timely closed, reduce volatilityBlending (mixing, stirring, etc.), coating (spray, dip, shower, roll coating, brushing, coating, etc.), bonding (glue, hot pressure, compounding, fitting, etc.), drying (drying, air drying, drying, etc.), cleaning (immersion, spray washing, washing, washing, scrubbing, scrubbing, scrubbing, etc.) Etc, such as VOCs-related processes, should be in the closed negative pressure workshop, and set up exhaust pipe centralized collection and import pollution prevention and control facilities treatment, organic exhaust gas collection efficiency is not less than 80%, and in line with the "volatile organic non-organized emission control standards" (GB37822-2019) related requirementsPromote the use of electrostatic spraying, coating, roller coating, dipping and other advanced technology(iii) install ingesting facilities for the prevention and control of high-efficiency pollutionfurniture enterprises to install pollution prevention and control facilities should include: exhaust gas collection facilities, exhaust gas treatment facilities and exhaust gas cylindersExhaust gas collection facilities exhaust pipes should be in accordance with the Guangdong Province pollution source sewage outlet standardization setting guidelines (Guangdong ring (2008) No 42) and other requirements to set up closed sampling ports, in order to detect the concentration before and after the purification of organic exhaust gas, there must be no bypass or exhaust gas leakage phenomenon The exhaust gas treatment facility should have the function of handling paint mist, filtering dust, and purifying organic exhaust gas efficiently, and can reflect the exhaust gas flow rate, total VOCs concentration and total VOCs removal rate (in line with the relevant national and provincial standards), to ensure that the exhaust gas is stable and meets the standard emissions The height of the exhaust gas cylinder shall generally not be less than 15 metres VOCs emissions meet the requirements of Guangdong Province's Volatile Organic Compound emission standard (DB44/814-2010) and volatile organic non-organized emission control standard (GB37822-2019) For the use of water-based coatings and other low VOCs content of raw materials, VOCs removal rate is not less than 50%, for the use of solvent-based raw materials, VOCs removal rate should reach more than 80%, for VOCs pre-purification emission rate of more than 2 kg / hour of furniture enterprises, VOCs removal rate should reach more than 80% (4) to standardize internal management furniture enterprises should be based on the actual production conditions, standardize the internal management mechanism, establish the account management system and operating procedures, clear the replacement cycle of waste gas treatment supplies, record the name of THE original materials containing VOCs (coatings, curing agents, thinners, adhesives, cleaning agents, etc.) and its VOCs content, including VOCs raw materials procurement volume, usage, inventory, VOs raw materials recovery Method and recovery volume, exhaust gas collection and treatment facilities key parameters, waste gas treatment-related supplies (activated carbon, filter cotton, UV lamps, etc.) purchase, replacement records, as well as after the use of activated carbon, filter cotton, UV lamps and other hazards, storage and disposal, pollution prevention and control facilities installation and maintenance operation, internal self-inspection and staff pollution prevention and control (production operation and facility operation) training The term of deposit of the account shall not be less than three years notice requires furniture manufacturing enterprises in the administrative area of Guangzhou to complete these four-point rectification tasks by June 30, 2020 After the furniture manufacturing enterprise has completed the pollution control, it shall promptly inform the ecological environment department of the territory, submit the basic information of the unit, the report of the rectification engineering technology, the exhaust gas monitoring report issued by the qualified monitoring unit and the relevant materials such as the internal management account, and cooperate with the relevant departments and units to verify the rectification situation Furniture manufacturing enterprises that have one of the following acts will be investigated and punished by the ecological environment department in accordance with the law: (1) Volatile organic pollution emissions do not meet the "Furniture Manufacturing Volatile Organic Compound emission standards" (DB44/814-2010) and "Volatile Organic Non-organized Emissions" Control Standards (GB37822-2019) and other standards, (2) as of July 1, 2020, do not meet the requirements of the fourth point of this Notice, in violation of the "People's Republic of China Air Pollution Prevention and Control Law" and other laws and regulations, continue to carry out production activities the ecological environment, industry and information technology and market supervision and management departments to strengthen the linkage mechanism, jointly carry out the furniture manufacturing industry VOCs pollution control work, supervision and guidance industry to carry out production processes and equipment hydrating transformation, increase water-based coatings, water-based adhesives and other volatile organic raw materials cleaning replacement, the establishment of rectification and promotion and regulatory notification system this notice encourages the selection of high-efficiency purification processes for VOCs exhaust gases that do not produce or produce less solids, and reduce the amount of solids produced For the VOCs waste gas purification process generated by activated carbon, filter cotton, UV lamps and other hazards, should be in strict accordance with the hazard storage standards (GB18597-2001) for storage, and handed over to the corresponding business license qualification of the hazard treatment and disposal units for disposal and disposal; In accordance with the law to rectify the clean-up of "unlicensed operation" or "environmental procedures are not complete" furniture manufacturing enterprises