"Graphene zinc powder coating" and other 10 chemical industry standards officially approved the release

recently, the Ministry of Industry and Information Technology approved and published 10 coatings and related areas of industry standardsThese industry standards will be put into effect on July 1, 2020standard numberstandard name
HG/T5571-2019coating with natural resin emulsion
HG/T5572-2019petrochemical equipment interior wall acid-resistant anti-corrosion coating
HG/T5573-2019graphite zinc powder coating
HG/T37 93-2019hot-melt fluororereresin (PVDF) coating
HG/T4104-2019water-based fluorine resin coating
HG/T5578-2019metal guardrail powder coating
HG/T5574-2019
CⅠPigment Red 149
HG/T5575-2019
CⅠPigment Yellow 139
HG/T5576-2019
CⅠPigment Yellow 154
HG/T5577-2019
CⅠPigment blue 15:2
HG/T5571-2019 coating with natural resin emulsion this standard defines the terms and definitions of natural resin emulsions for coatings, product classification, requirements, test methods, inspection rules and signs, packaging and storage This standard applies to natural resin emulsions made from raw materials or main ingredients such as pine, vegetable oil, starch, sugar, natural latex, plant fiber and other natural plant raw materials The product can be used for water-based building coatings, water-based wood coatings and other water-based coatings, forming a membrane bonding effect HG/T5572-2019 Petrochemical equipment with acid-resistant anti-corrosion coatings this standard stipulates the requirements of acid-resistant anti-corrosion coatings for the inner walls of petrochemical equipment, test methods, inspection rules and signs, packaging and storage This standard is applicable to epoxy resin, vinyl or other polymers as the main film-forming substances, add pigments, fillers, additives, such as the preparation of two-component coatings, products are mainly applicable to high temperature, high pressure (temperature not more than 100 degrees C, pressure is not greater than 10MPa) and contains H
2
S , co
2 , Cl
-
, F
-
, NO
3
-
, SO
4
2-
and hydrocarbons in the acidic medium environment of steel storage tanks, pressure vessels, pipelines and concrete facilities and other petrochemical equipment wall anti-corrosion protection HG/T5573-2019 Graphene Zinc Powder Coatings
this standard defines the terms and definitions of graphene zinc powder coatings, product classification, requirements, test methods, inspection rules and signs, packaging and storage This standard applies to coatings consisting of graphene materials, zinc powders, inorganic or organic paint bases, and the products are mainly used for corrosion protection of the surface of steel substrates under the atmospheric corrosion level (C2-C5) defined in ISO12944-2:2017 This standard does not apply to zinc powder coating products with a metal zinc content of less than 30% in non-volatile fractions HG/T3793-2019 hot-melt fluororeresin (PVDF) coatings
this standard specifies the product classification, requirements, test methods, inspection rules and markings, packaging and storage of hot-melt fluororere (PVDF) coatings This standard is applicable to poly-bifluoroethylene resin (PVDF) and acrylic resin as the main film, added yan filler (cleansing not), additives, such as water-based and solvent-based hot-melt fluoro-resin (PVDF) coatings, the product is mainly used for aluminum and aluminum alloy and other metal surface decoration and protection HG/T4104-2019 water-based fluorine resin coating
this standard provides for the classification of aquatic fluorine resin coatingproduct products, requirements, test methods, inspection rules and signs, packaging and storage and other content This standard is applicable to co-polymer water-based coatings with C-F bonds, which are mainly used for decoration and protection of building exterior surfaces, concrete facility surfaces and metal surfaces This standard does not apply to hot-melt fluororere (PVDF) coatings Water-based fluorine resin coatings for other types of substrates can be used to refer to this standard HG/T5578-2019 Metal guardrail powder coating
this standard stipulates the metal guardrail powder coating product classification, requirements, test methods, inspection rules and signs, packaging and storage and other content This standard applies to resins, curing agents and pigments, fillers, additives, etc formulated from the thermoset powder coating, the product is mainly applicable to metal substrate guardrails HG/T5574-2019C Ⅰ The this standard stipulates the requirements, sampling, test methods, inspection rules and signs, packaging, transportation and storage of C.I pigment red 149 This standard is applicable to insoluble thick ring pigments produced by thorium and 35-dimethyl aniline condensed, and produced by special pigment treatment, mainly used in plastics, coatings and money printing inks and other fields HG/T5575-2019C Ⅰ The this standard stipulates the requirements, sampling, test methods, inspection rules and signs, packaging, transportation and storage of C.I pigment yellow 139 This standard is suitable for isophathan pigments produced mainly by the consizing of 13-diaminosia and barbiturates, and are treated with special pigment Products are mainly used in coatings, plastics and inks and other fields HG/T5576-2019C Ⅰ The standard of the pigment yellow 154 this standard stipulates the requirements, sampling, test method, inspection rules and signs, packaging, transportation and storage of C.I pigment yellow 154 This standard applies to benzodiazepine pigments produced by heavy nitrogen salts of phabelu-fluorine methylamphetamine and 5-acetylacetamine- and 5-acetylacetamineketone conjugated Products are mainly used in building coatings, industrial coatings and other fields HG/T5577-2019C Ⅰ Pigment Blue 15:2 This standard stipulates the requirements, sampling, test methods, inspection rules and signs, packaging, transportation and storage of C.I pigment blue 15:2 products This standard is applicable to the anti-crystalline anti-flocculation alpha crystal-type indigo pigment streatium pigment produced by the copper crucifying method Products are mainly used in coatings, rubber, inkand and plastics and other fields