Fully automatic liquid automatic filling machine debugging mode

Fully automatic filling machine is widely used in food, daily chemical, pharmaceutical, petroleum and other industries, with huge market development potential and reliable quality, after purchasing a fully automatic filling machine, you still need to debug the filling accuracy and filling speed of the required filling machine, in this regard, some people are still more confused, in fact, as long as it is done once, you will know that it is relatively simple
.

The debugging method of the automatic filling machine The debugging steps of the automatic filling machine are as follows: 1.
First loosen the nut of the automatic filling machine, and then adjust the screw to change the position of the lower fixed rod, and then the push and pull length of the needle is also changed, in order to achieve the purpose of freely adjusting the amount of distribution, adjust the screw clockwise to make it increase, on the contrary, the screw is reduced, and the pointer next to it indicates; 2.
Tighten the nut after adjustment so that the lower fixing rod and crank are tightly fixed; 3.
Loosen the nut, and determine the position of the upper fixing rod according to the push and pull length of different injection devices, adjust the lower fixing rod, turn the crank to turn the needle upwards to the upper stop point , then lift the outer tube of the needle up about 2 mm to avoid damaging the needle tube, and then tighten the nut before opening the machine; 4.
After correctly installing the automatic filling machine, open the switch, when the machine is working, the crank drives the injection device to pull the liquid up and down, adjust the speed knob, select the appropriate distribution speed, and then start normal operation, adjust the speed adjuster knob, distribute the speed clockwise fast, and vice versa
.

Features of the three filling methods of the automatic filling machine: 1.
Atmospheric pressure filling method: This type of equipment usually raises the storage tank to increase the pressure, it has its own weight as the driving force, suitable for processing milk, wine and other products with good fluidity and low viscosity
.

2.
Negative pressure filling method: This type of equipment is also called vacuum filling machine, it must be ensured that the pressure in the bottle is lower than atmospheric pressure, and then fill the product according to the principle of air pressure balance, this type of equipment is usually simple in structure, but the components combine to have strong air tightness, and there is no main requirement for the viscosity of the material, it can complete the processing
of syrup, oil, sauce and other products.

3.
Pressure filling method: This equipment is filled under conditions higher than atmospheric pressure, one is to use the pressure in the tank to balance the pressure in the bottle, the liquid material flows into the bottle with its own weight, and the other is to add a booster piston to the top of the tank to help complete the processing
.