Fully automated biochemical incubator installation steps and maintenance

The fully automatic biochemical incubator ensures that the humidity in the box is maintained within a certain range under a certain temperature through the regulation of temperature and humidity, so as to provide a constant temperature and humidity environment, and the temperature and humidity of the internal space of the studio are more evenly distributed
through the fan circulation.

Fully automatic biochemical incubator installation steps and maintenance: 1.
When installing the setting, pay attention not to let dust, wire, iron filings or other things enter, otherwise there will be wrong action or failure
.

2, when wiping with a dry cloth, do not use alcohol, gasoline or other organic solvents, do not splash water on the instrument, if the instrument is immersed in water, please stop using it immediately, otherwise there is a risk of
leakage, electric shock or fire.

3.
When running, if you want to modify the settings, signal output, start, stop and other operations, you should fully consider the safety, the wrong operation will cause damage or failure
of the working equipment.

4.
The wiring must be correct and must be grounded
.

Failure to ground may result in electric shock, mismanagement, display abnormalities, or large measurement errors
.

5.
Check the terminal screws and retention mechanism regularly, please do not use them in the case of looseness
.

6.
During operation, the power supply inlet terminal cover must be installed on the terminal board to prevent electric
shock.

7.
Internal parts have a certain life cycle, in order to continue to use this instrument safely, please regularly maintain and maintain
.

When scrapping this product, it should be disposed
of according to industrial waste.