-
Categories
-
Pharmaceutical Intermediates
-
Active Pharmaceutical Ingredients
-
Food Additives
- Industrial Coatings
- Agrochemicals
- Dyes and Pigments
- Surfactant
- Flavors and Fragrances
- Chemical Reagents
- Catalyst and Auxiliary
- Natural Products
- Inorganic Chemistry
-
Organic Chemistry
-
Biochemical Engineering
- Analytical Chemistry
-
Cosmetic Ingredient
- Water Treatment Chemical
-
Pharmaceutical Intermediates
Promotion
ECHEMI Mall
Wholesale
Weekly Price
Exhibition
News
-
Trade Service
On August 16, the technical transformation of the calcium carbide furnace dust collector independently implemented by the Shaanxi Coal Group Fugu Energy Company was completed.
After the transformation, all the furnace dust collectors have been put into use to meet the needs of normal production and ensure that the emission standards are met
.
The technological transformation investment is about 480,000 yuan.
After the transformation, the fugitive emission of the calcium carbide furnace at each side of the furnace meets the relevant national standards, and the emission from the tail chimney of the furnace dust collector is less than 30mg/m3.
? It is reported that the company produces 330,000 calcium carbide per year.
Tons, there are 4 closed calcium carbide furnaces, and the equipment and production technology are at the advanced level in the industry
.
In response to the current severe environmental protection situation, the company has formulated the "Renovation Plan for the Injection Method of the Dust Collector in the Phase I Project of Calcium Carbide" in accordance with the actual production.
It mainly addresses the problems of poor dust removal effect of the original equipment and high damage rate of the dust removal bag.
Under the premise of body shape and pattern, the pulse dust collector of the out-of-furnace dust removal air box is transformed into a tube jet pulse dust cleaning belt dust collector, which can remove the bag dust during back blowing to achieve the best cleaning effect
.
This will not only help maximize dust removal, but also increase the utilization rate of the bag filter
.
After the transformation, all the furnace dust collectors have been put into use to meet the needs of normal production and ensure that the emission standards are met
.
The technological transformation investment is about 480,000 yuan.
After the transformation, the fugitive emission of the calcium carbide furnace at each side of the furnace meets the relevant national standards, and the emission from the tail chimney of the furnace dust collector is less than 30mg/m3.
? It is reported that the company produces 330,000 calcium carbide per year.
Tons, there are 4 closed calcium carbide furnaces, and the equipment and production technology are at the advanced level in the industry
.
In response to the current severe environmental protection situation, the company has formulated the "Renovation Plan for the Injection Method of the Dust Collector in the Phase I Project of Calcium Carbide" in accordance with the actual production.
It mainly addresses the problems of poor dust removal effect of the original equipment and high damage rate of the dust removal bag.
Under the premise of body shape and pattern, the pulse dust collector of the out-of-furnace dust removal air box is transformed into a tube jet pulse dust cleaning belt dust collector, which can remove the bag dust during back blowing to achieve the best cleaning effect
.
This will not only help maximize dust removal, but also increase the utilization rate of the bag filter
.
