Flame Photometer - A stable and reliable multi-element flame meter @2022 has been updated

DDB Flame Photometer – A stable and reliable multi-element flame meter @2022 has been updated With the Hengmei Flame photometer - a stable and reliable multi-element flame meter @ 2022 has been updated With DDB Flame Photometer is a newly designed instrument
.

It has the advantages
of small size, easy operation and stability and reliability.

The whole series is equipped with ion detection and flameout protection device as standard, which is safe and reliable
.

Widely used in agricultural fertilizer, soil, cement, ceramics and other industries and silicic acid industry analysis and measurement; Pathological studies
of health care.

The HM Series Flame Photometer uses liquefied gas for gas
.

DDB Flame Photometer Instrument Features: 1) With the concentration direct reading function of five elements of K, Na, Li, Ca and Ba, it can display up to 3 kinds of elements in any combination at the same time; 2) Menu-style keyboard operation; 3) With automatic calculation function of correlation coefficient; 4) With flame size pre-selected function; 5) With flameout protection device; 6) With single point correction function; 7) With the function of saving standard curves; 8) With RS232 interface, can be connected to printer and computer PC software; 9) With moisture separator
.

Technical parameters of DDB Flame Photometer: Model HM-22HM-30HM-31HM-32HM-40HM-41HM-50 Display Range ug/ml Potassium 0-1000-1000-1000-1000-1000-1000 Sodium 0-1000-1000-1000-1000-1000-1000-100 Lithium*0-100**0-1000-1000-100 Calcium**0-1000*0-1000*0-1000 Barium*** 0-3000*0-30000-3000 Detection Limit mmol/L Potassium ≤0.
004≤0.
004≤0.
004≤0.
004≤0.
004≤0.
004≤0.
004 Sodium ≤0.
008≤0.
008≤0.
008≤0.
008≤0.
008≤0.
008≤0.
008 Lithium*≤0.
015**≤0.
015≤0.
015≤0.
015 Calcium**≤0.
050*≤0.
050*≤0.
050*** *** ≤ 0.
058*≤0.
058≤0.
058 linearity error mmol/L potassium ≤0.
005≤0.
005≤0.
005≤0.
005≤0.
005≤0.
005≤0.
005 sodium≤0.
03≤0.
03≤ 0.
03≤0.
03≤0.
03≤0.
03≤0.
03 Lithium*≤0.
02**≤0.
02≤0.
02≤0.
02 Calcium**≤0.
07*≤0.
07*≤0.
07 Barium***≤0.
07* ≤ 0.
07≤0.
07 stability with the standard solution continuously injected, the relative maximum change of the instrument indication within 15s ≤ 3%, measured once per minute, a total of 6 instrument indications of the relative maximum change ≤ 15% Response time <8 seconds Minimum suction spray <6mL / min Repeatability Of the same standard solution repeatedly 7 consecutive independent measurements≤ 3% test element potassium sodium lithium potassium sodium calcium potassium sodium barium potassium sodium lithium calcium potassium sodium lithium barium potassium sodium lithium barium potassium sodium lithium calcium barium channel number 2333445 curve calibration polyline method straight line is legal Curve quasi-legal printer optional connection computer is