-
Categories
-
Pharmaceutical Intermediates
-
Active Pharmaceutical Ingredients
-
Food Additives
- Industrial Coatings
- Agrochemicals
- Dyes and Pigments
- Surfactant
- Flavors and Fragrances
- Chemical Reagents
- Catalyst and Auxiliary
- Natural Products
- Inorganic Chemistry
-
Organic Chemistry
-
Biochemical Engineering
- Analytical Chemistry
-
Cosmetic Ingredient
- Water Treatment Chemical
-
Pharmaceutical Intermediates
Promotion
ECHEMI Mall
Wholesale
Weekly Price
Exhibition
News
-
Trade Service
1
structure and use
FX-450 is a vinyl ester resin based on tetrabromobisphenol A epoxy resin
FX-450 resin has the general vinyl ester resin corrosion resistance, excellent flame retardant properties, very excellent sulfuric acid resistance, heat resistance, and excellent toughness, oxygen index ≥ 30
The resin structure is as follows:
2
Liquid index of resin
project | unit | data |
Acid value | KOH mg/g | 6-18 |
Viscosity (25℃) | mpa. | 350-500 |
gel time (25℃) | Min | 10-20 |
Note: gel time test, FX-450/6% cyclocobalt/LPT(925H)=100/0.
" style='margin: 5px auto; padding: 0px; outline: 0px; max-width: 100%; color: rgb(51, 51, 51); font-family: -apple-system, BlinkMacSystemFont, "Helvetica Neue", "PingFang SC", "Hiragino Sans GB", "Microsoft YaHei UI", "Microsoft YaHei", Arial, sans-serif; font-size: 17px; letter-spacing: 0.
3
Casting body performance index
Test items | unit | data |
Tensile Strength | MPa | 76-85 |
tensile elongation at break | % | 4. |
Bending strength | MPa | 120-130 |
Flexural modulus | GPa | 3. |
Heat distortion temperature | °C | 108-115 |
Barcol hardness | | |
Volume shrinkage | % | 7. |
Pure oxygen index | |
Note: curing conditions, curing at room temperature for 24 hours, curing at 120 ℃ for 2 hours coating online coatingol.
com
.
All subsequent data are tested in GB
.
4
Glass fiber product performance index
Test items | unit | FX-450 |
Tensile Strength | MPa | 95 |
Bending strength | MPa | 145 |
Flexural modulus | GPa | 7. |
Barcol hardness | | 50 |
FRP flame retardant performance test (ASTM E84) | ||
Flame Spread Index (FSI) | ClassB |
Note: ①3mm laminate structure: S/M/M/M/S, S=surface mat, 30g/ m 2 ; M=chopped glass mat, 450g/ m 2 ②Curing program: After curing at room temperature for 24 hours, 120 Post cure for 2 hours at °C
.
The above are typical data tested in accordance with the corresponding national standard GB, and cannot be used as a standard
.
5
Applications
①Application fields: glass fiber reinforced plastic (FRP) products, ships, storage tanks, pipes, floors, flue gas desulfurization industry, chemical industry anticorrosion, metallurgical industry and other fields
②Molding process: hand lay-up molding, continuous pultrusion molding, injection molding, filament winding molding, compression molding, resin transfer molding (RTM technology) and vacuum infusion
6
storage and use
① Shelf life: Under normal temperature conditions, 3 months from the date of shipment; it is recommended that the storage temperature should be below 25 ℃, and the shelf life of the product will decrease with the increase of the storage environment temperature
.
Avoid being near or exposed to heat sources, such as direct sunlight, near steam pipes, etc.
②When using, the accelerator should be added first, and then the curing agent should be added after complete mixing
.
Avoid storing hardeners in metal containers
③ For safety measures, please refer to the product safety data sheet (MSDS)