EL3064 EtherCAT terminal module, 4-channel analog input, voltage

The EL3064 analog input terminals handle signals
in the range of 0 to 10 V.
The voltage is digitized at 12-bit resolution and transmitted (galvanically isolated) to higher-level automation equipment
.
The EL3064 EtherCAT terminal module has a 2-wire conductor for four single-ended inputs with a common internal ground potential
.
Power contacts are connected through
.
The signal status of the EtherCAT terminal module is indicated
by the LEDs.
Product Information Technology Data Order Information Accessories Document and Download Beckhoff Information SystemMore InformationRelated Product Technical Data Housing Data Reach Apex Technical Data EL3064, ES3064Input Quantity4 (Single-ended) Power Supply via E-bus Technology Single-Ended Signal TypeSingle-Ended Signal Voltage 0.
.
.
10 volt distributed clock – internal resistance> 130 kΩ input filter limits frequency to 1kHz dielectric strength maximum
.
30 volt conversion time0.
625 ms Default setting, configurable, multiplexed resolution 12-bit (16-bit representation, including symbol) measurement error< ±0.
3 % (relative to full-scale value) galvanically isolated 500 V (E-bus/signal voltage) current consumption Power supply contact – current consumption E-bus type
。 Bit width input in 130 mA process image: 16-byte special function activatable FIR/IIR filter, limit value monitoring weight approx.
60 g Operating / Storage temperature -25.
.
.
+60 °C/-40.
.
.
+85 °C relative humidity 95 %, non-condensing vibration/shock resistant according to EN 60068-2-6/EN 60068-2-27EMC immunity/radiation according to EN 61000-6-2/EN 61000-6-4 protection
。 Rating/Installation PositionIP20/Variable Pluggable Wiring for All ESxxxx Terminal Approval/Marking CE, UL, ATEX Explosion Proof Mark II 3 G Ex nA IIC T4 Gc Technical Data Housing Data Reaching the Apex Housing Data EL-12-8pinES-12-8pin Design Form Compact Terminal Housing with Signal LED Terminal Housing with Pluggable Terminal Layers Terminal Housing Material Polycarbonate Size (W x H x D) 12 mm x 100 mm x 68 mm Mounted 35 mm DIN rail according to EN 60715 Label wiring solid conductor (e), flexible conductor (f) and ferrule (a) of the BZxxx series marked with lock by side-by-side installation of double grooves and key connection: screwdriver driven spring connection section s*: 0.
08.
.
.
2.
5 mm²,st*: 0.
08.
.
.
2.
5 mm²,f*: 0.
14.
.
.
1.
5 mm²s*: 0.
08.
.
.
1.
5 mm²,st*: 0.
08.
.
.
1.
5 mm²,f*: 0.
14.
.
.
1.
5 mm² connection cross-section AWGs*: AWG 28.
.
.
14，st*：AWG 28.
.
.
14，f*：AWG 26.
.
.
16s*：AWG 28.
.
.
16，st*：AWG 28.
.
.
16，f*：AWG 26.
.
.
16 stripping length 8.
.
.
9 mm 9.
.
.
10 mm current load power supply contact I max: 10 A*s: solid wire; st: stranded wire; f: With ferrule