EL2624 EtherCAT terminal module, 4-channel relay output

The EL2624 output terminals have four relays, each with a contact
.
Relay contacts are available up to 125 V AC or 30 V DC
.
The signal status of the EtherCAT terminal module is indicated
by the LEDs.
The EL2624 has a potential-free contact
.
Power contacts pass through
.
Special features: Relay output4 x Connecting to Ohmic LoadsConnecting Potentialless ProductsInformation Technology DataOrdering InformationAccessoriesDocumentation and Downloading Beckhoff Information SystemMore InformationAdditional ProductsRelated ProductsTechnical Data Housing Data Reaching the Apex Technical Data EL2624, ES2624 Connection TechnologyRelay Output Outputs4 x Establishing ConnectionsNominal Voltage125 Volts AC/30 Volts DC Load TypeOhm's Distributed Clock – Ohmic Switch Current 0.
5 A AC/2 A per channel DC inductive switching current without data Minimum allowable load of 10 μA at 10 mV DC with full contact coating current consumption E-bus type
.
200 mA galvanically isolated 500 V (E-bus/field potential) current consumption power contacts – bit width in the process image 4 output operating cycle machinery
.
(min) 1×10 8 operating cycle electricity
.
(min) 2 x 10 5 (1 A/30 V DC) configuration without address or configuration setting weight approx.
50 g Operating / Storage Temperature 0.
.
.
+55 °C/-25.
.
.
+85 °C Relative humidity 95 %, non-condensing vibration / shock resistance according to EN 60068-2-6/EN 60068-2-27EMC immunity/radiation according to EN 61000-6-2/EN 61000-6-4 protection
。 Rating/Installation PositionIP20/Variable Pluggable Wiring for All ESxxxx Terminal Approval/Marking CE, UL Technical Data Housing Data Arrival Apex Housing Data EL-12-8pinES-12-8pin Design Form Compact terminal housing with signal LEDs Terminal housing material with pluggable terminal layers Polycarbonate dimensions (W x H x D) 12 mm x 100 mm x 68 mm mounted on a 35 mm DIN rail in accordance with EN 60715 Label wiring solid conductor (e), flexible conductor (f) and ferrule (a) with lock by side-by-side installation of double groove and key connection marking BZxxx series: screwdriver driven spring connection section s*: 0.
08.
.
.
2.
5 mm²,st*: 0.
08.
.
.
2.
5 mm²,f*: 0.
14.
.
.
1.
5 mm²s*: 0.
08.
.
.
1.
5 mm²,st*: 0.
08.
.
.
1.
5 mm²,f*: 0.
14.
.
.
1.
5 mm² connection cross-section AWGs*: AWG 28.
.
.
14，st*：AWG 28.
.
.
14，f*：AWG 26.
.
.
16s*：AWG 28.
.
.
16，st*：AWG 28.
.
.
16，f*：AWG 26.
.
.
16 stripping length 8.
.
.
9 mm 9.
.
.
10 mm current load power contact I max: 10 A