Butterfly valve development and application introduction

The disadvantage of rubber sealed butterfly valve is that when it is used for throttling, the rubber seat will be peeled off and damaged due to improper use In recent years, China has also developed metal sealed butterfly valves, and in Japan, comb shaped butterfly valves with cavitation resistance, low vibration and low noise have also been developed Under normal conditions, the service life of general sealing seat is 15-20 years for rubber and 80-90 years for metal However, how to select correctly depends on the working condition The relationship between the opening and flow of butterfly valve is basically linear If it is used to control the flow, its flow characteristics are closely related to the flow resistance of the piping For example, the caliber and form of the valve installed in the two pipelines are the same, while the flow of the valve will be greatly different if the pipeline loss coefficient is different If the valve is in a large throttling range, the back of the valve plate is prone to cavitation, which may damage the valve Generally, it is used outside 15 ° 
When the butterfly valve is in the middle opening, the opening shape formed by the valve body and the front end of the butterfly plate takes the valve shaft as the center, and the two sides form different states The front end of the butterfly plate on one side moves in the direction of flowing water, and the other side moves in the direction of flowing water Therefore, the valve body on one side and the valve plate form a nozzle like opening, and the other side is similar to the orifice like opening, and the flow rate on the nozzle side is much faster than that on the throttle side, while the throttle side There will be negative pressure under the valve, and rubber seals will often fall off The operating torque of butterfly valve varies with the opening and opening direction of the valve The torque of horizontal butterfly valve, especially large-diameter valve, due to the water depth and the difference between the upper and lower ends of the valve shaft cannot be ignored In addition, when the elbow is installed at the inlet side of the valve, the bias current will be formed and the torque will be increased When the valve is in the middle opening, the operating mechanism needs self-locking due to the action of hydrodynamic moment Previous valve knowledge: classification and characteristics of hydraulic control valve next valve knowledge: features and precautions of butterfly valve, advantages and disadvantages of butterfly valve· Working principle of exhaust valve 2009-6-21 guide for selection of drain valve 2009-6-13 ·Working principle and characteristics of diaphragm valve 2009-6-12 · working principle and classification of check valve 2009-6-12 · working principle of safety valve 2009-6-12
Related similar products:
Zdrw-6k electronic electric regulating butterfly valve
Zssw pneumatic three eccentric regulating cut-off butterfly valve
Hd7xp41x (H) large diameter hydraulic control energy storage butterfly valve
Dhh74x butterfly buffer check valve