-
Categories
-
Pharmaceutical Intermediates
-
Active Pharmaceutical Ingredients
-
Food Additives
- Industrial Coatings
- Agrochemicals
- Dyes and Pigments
- Surfactant
- Flavors and Fragrances
- Chemical Reagents
- Catalyst and Auxiliary
- Natural Products
- Inorganic Chemistry
-
Organic Chemistry
-
Biochemical Engineering
- Analytical Chemistry
-
Cosmetic Ingredient
- Water Treatment Chemical
-
Pharmaceutical Intermediates
Promotion
ECHEMI Mall
Wholesale
Weekly Price
Exhibition
News
-
Trade Service
The crushed stone impact tester/stone impact tester is mainly used to accurately reproduce the breaking phenomenon caused by the splashing sand and gravel, and is suitable for the cohesion failure test of the outer coating, and the different layers in the coating system.
Adhesion failure test, brittle thickness of hard glass materials, coating thickness against peeling, peeling resistance of plastics and glass, anti-collision, anti-wear testing and other related tests
.
Test principle: The crushed stone impact tester is a multi-impact instrument.
Its advantage is that the results obtained have good repeatability and comparability.
The sample is impacted by compressed air and accelerated sharp particles.
The air storage tank of the instrument itself It can reduce the influence of the instantaneous pressure fluctuation of the external compressed air, so as to provide a constant impact pressure, and use the vibration method to feed the particles
.
The multi-kinetic energy display can display the working pressure, test time, vibration feeding method and impact times
.
Applicable standards: GMW 1407, JIS M0141, TL211-6, GME 60 268, ASTM D3170, SAE J400, FORD, Chrysler 463PB-39-01, GMW14668-3.
4.
9, Chrysler 463PB-52-01, GM 9119P/9508P/ 9619P, Mazda MES MN 601C, Nissan, Volkswagen, Toyota, ISO 20567-1 Specifications: 1.
Test environment conditions: ambient temperature 5～35℃, relative humidity ≤85%RH, test box with sample 2.
Pressure range : 0～1Mpa (adjustable) 3.
Air tank volume: 136L4.
Inner diameter of gun barrel: 53mm5.
Maximum sample size: width≦195mm\thickness≦35mm\length≦240mm6.
Noise value: noise≦130dba (operators need Wear protective earplugs and protective glasses) 7.
Operation mode: suitable for continuous operation 8.
Test medium: pebbles, chilled cast iron gravel and steel balls 9.
Feeding rate: adjusted by pneumatic vibrating feeder 10.
Overall structure: angle Adjustable collision chamber, 3D collision chamber, spray gun, pneumatic vibration feed port, collection box, electric control cabinet, PLC display screen
Adhesion failure test, brittle thickness of hard glass materials, coating thickness against peeling, peeling resistance of plastics and glass, anti-collision, anti-wear testing and other related tests
.
Test principle: The crushed stone impact tester is a multi-impact instrument.
Its advantage is that the results obtained have good repeatability and comparability.
The sample is impacted by compressed air and accelerated sharp particles.
The air storage tank of the instrument itself It can reduce the influence of the instantaneous pressure fluctuation of the external compressed air, so as to provide a constant impact pressure, and use the vibration method to feed the particles
.
The multi-kinetic energy display can display the working pressure, test time, vibration feeding method and impact times
.
Applicable standards: GMW 1407, JIS M0141, TL211-6, GME 60 268, ASTM D3170, SAE J400, FORD, Chrysler 463PB-39-01, GMW14668-3.
4.
9, Chrysler 463PB-52-01, GM 9119P/9508P/ 9619P, Mazda MES MN 601C, Nissan, Volkswagen, Toyota, ISO 20567-1 Specifications: 1.
Test environment conditions: ambient temperature 5～35℃, relative humidity ≤85%RH, test box with sample 2.
Pressure range : 0～1Mpa (adjustable) 3.
Air tank volume: 136L4.
Inner diameter of gun barrel: 53mm5.
Maximum sample size: width≦195mm\thickness≦35mm\length≦240mm6.
Noise value: noise≦130dba (operators need Wear protective earplugs and protective glasses) 7.
Operation mode: suitable for continuous operation 8.
Test medium: pebbles, chilled cast iron gravel and steel balls 9.
Feeding rate: adjusted by pneumatic vibrating feeder 10.
Overall structure: angle Adjustable collision chamber, 3D collision chamber, spray gun, pneumatic vibration feed port, collection box, electric control cabinet, PLC display screen
