Considerations for model size selection for high and low temperature cycles

High and low temperature cycle using mechanical refrigeration, low temperature heating pipe heating to take high temperature, shielding pump as a circulation pump, the entire system liquid circulation is sealed, composed of two systems, each control the corresponding system, and according to the process requirements through the heat transfer oil cycle automatically adjust the heating or cooling
.

1.
The high and low temperature circulation is composed of a pump, heating pipe, cooling heat exchanger, refrigeration system, temperature control system, pipeline and rack
.

The flow of heat transfer oil between the thermal medium pipe of the unit and the jacket or coil of the reactor is flowing, and the circulation pump, the heat transfer oil pipeline, the heating device and the cooling device constitute the basic circuit
of the hot medium.

2, after the end of the high and low temperature cycle reaction, the temperature in the reactor is first reduced to room temperature, in a step of chemical process, the existing heating system of the reactor is relatively simple, the temperature in the reactor to the room temperature reduction process takes a long time, and can not rationally use the thermal energy, resulting in a waste of some resources
.

3, high and low temperature cycle size has a certain difference, can be customized according to user requirements of the size and customized isolation explosion-proof and a variety of optional functions
.

In general, the size of each model is not the same, users can put forward their own size requirements when communicating, customization
.

4, the compressor refrigeration (stand-alone self-stacking refrigeration technology), fully closed system, there will be no oil mist at high temperature, low temperature does not absorb water in the air, the system will not rise in pressure because of high temperature in operation, low temperature automatically replenishes the heat conduction medium
.

5, high and low temperature cycle is mainly used in combination with the reactor, can provide a circulation device with heat source and cold source, the working range is very wide, used in pharmaceutical, chemical, biochemical, biological and other industries
.