Common installation methods of solar aerators

Solar aerator common installation method Solar aerator adopts floating installation, convenience is one of its important features, no need to install the foundation, flexible adjustment of the installation position
as needed.

The equipment can adopt anchor fixed, barge pull type, plug rod fixation and other fixing methods: 1.
Anchor fixed, suitable for water depth, wide reservoir or large lake; 2.
Barge pull-in type: suitable for narrow rivers with no flood requirements; 3.
Plug rod fixed type: suitable for natural mud bottom waters
with a water depth of less than 3m.

Commissioning and operation of solar aerator Due to the lag in the construction of the pipe network, all the sewage could not be connected to the sewage treatment plant, resulting in a small amount of water, so the inlet water of the two integrated reaction tanks was inoculated
and domesticated simultaneously.

Inoculation sludge is selected from the sludge after the municipal sewage treatment plant belt filter press, and the sludge
is added to each pool.

(1) The process starts quickly, runs stably, operates simply, and can ensure that the effluent meets the standards and produces less
sludge.

(2) As long as the conditions permit, the earth dam structure can be used to undertake the construction of a comprehensive reaction tank for sewage treatment, and can form an integrated structure with low cost and provincial
investment.

(3) Moving the suspension aeration head can extend the residence time of oxygen in water, improve the efficiency of oxygen transfer, and save energy consumption
while removing organic matter.

(4) The aeration head does not need to be empty during maintenance, and the maintenance is convenient
.