Common faults and solutions of automatic filling machines

The fully automatic application of Shanghai Shenggang has spanned many different industries, and now it is used as the main production equipment in many enterprises, and the production efficiency it can bring is directly related to people's production costs, As well as the corresponding benefits, if the automatic filling machine fails or has problems during use, it will undoubtedly bring huge economic losses to the enterprise.
Installation operators should understand
.

The host may not start because of air pressure protection, low air pressure or no air pressure Solution: Open the air pressure valve and increase the pressure
.


The start button of the automatic filling machine is broken or the line is broken.
The solution: replace the button and reset the maintenance line
.

Preventive measures: check carefully before production, communicate with the operator in time to solve the emergency stop button is not reset, the automatic filling machine stop button is broken or the line is broken, the solution; emergency stop reset
.

Replace the stop button to repair the circuit reset
.

Precautionary measures; do a good job in pre-production inspection and timely maintenance after shutdown
.

If it is found that the filling machine does not produce material, or the correct filling amount is clearly set, but the actual material discharge is not accurate, then you can first check whether the speed throttle valve and the filling interval throttle valve are correctly opened.
Status, if it is accidentally closed, it will directly affect the filling and discharging situation
.