-
Categories
-
Pharmaceutical Intermediates
-
Active Pharmaceutical Ingredients
-
Food Additives
- Industrial Coatings
- Agrochemicals
- Dyes and Pigments
- Surfactant
- Flavors and Fragrances
- Chemical Reagents
- Catalyst and Auxiliary
- Natural Products
- Inorganic Chemistry
-
Organic Chemistry
-
Biochemical Engineering
- Analytical Chemistry
-
Cosmetic Ingredient
- Water Treatment Chemical
-
Pharmaceutical Intermediates
Promotion
ECHEMI Mall
Wholesale
Weekly Price
Exhibition
News
-
Trade Service
Imitation stone paint (water-in-water, sand-in-water, real stone paint, etc.
1.
If there is no designated proofing location at the site, you should try to choose a lot of people, try to avoid places that are dirty and difficult to walk in front of the model
2.
After scraping the putty, it is necessary to carefully polish and level it, and fully water it for curing until it is hard to avoid the problem of peeling of the corners due to insufficient strength of the bottom layer
If it is the bottom layer prepared by the customer in advance, the strength and flatness must be checked first.
Three, the overall effect of the matching design
The lines should be collocation with the main body, and the lines should be smooth and tidy
Fourth, the corners and lines are neat and parallel
Pay attention to the protection of cross-contamination of different colors.
5.
After the sample is completed, it is necessary to check that the coating color and color spots are uniform, and dry for 24 hours to test the water resistance with water to avoid showing unqualified samples to customers.
Remedial measures must be taken if the template is found to be damaged during the inspection.
Problems like dirt that can be dealt with in time must be cleaned up in time
.
