Coating acceptance method

Coatings are coated on the surface of objects to be protected or decorated, and can form a continuous film firmly attached to the object to be coated, usually based on resin, oil, or emulsion, with or without pigments, fillers, and corresponding Additive, a viscous liquid prepared with organic solvent or water.

1.

Putty and the base layer are solid and firm, no shell, no chalking and cracking com" >coating online coatingol.

When making clear water paint, the wood grain should be clear, the brown eyes should be flattened, the color should be basically the same, and there should be no brush pattern.

There is no drooping, wrinkled skin, transparent bottom on the large side, and obvious on the small side.

Missing brushing, peeling, markings, rusting.

The surface is flat and smooth.

The deviation of the color separation line of the decorative line is not more than 2mm.

2.

Wooden doors and windows, the top surface of the upper hat of the fan and the bottom surface of the lower hat shall not be missed, and the yin and yang angles shall be neat and straight.

Whether the surface with mixed oil is smooth and saturated.

Whether the surface of the furniture varnish is uniform in thickness, the paint surface is saturated, clean, and free of particles.

Whether the wall paint has a smooth surface, uniform reflection, and no hollowing, bubbling, or cracking.

The paint for wood and gypsum board ceilings is generally latex paint, and the surface should be flat and there should be no cracks at the board joints.

Whether the smallpox corners are connected smoothly, and there are no obvious irregularities and deformations.

The wallpaper patchwork is inaccurate and there is no tearing phenomenon.

Whether there is no pollution or dirt on the wall.