Cleaning techniques for constant temperature and humidity incubators

1.
The remaining water of the storage tank is discharged out of the tank, which can not only prevent the scaling of the water tank, prevent errors in the next experiment, but also extend the service life of the storage tank; 2, the studio wet ball gauze removed, if the gauze appears yellow, hard, then directly disposed of, if the gauze is still intact and clean, then dry the next time continue to use, so that not only can save the gauze but also can maintain the humidity sensor
.

3, and then use a clean rag to wipe the water vapor or stains in the work room clean, such as the studio is inconvenient to manually clean, you can directly use the high temperature function of the constant temperature and humidity incubator, set the high temperature barbecue of 50 degrees for half an hour; 4.
Open the wind shield under the studio, and use a vacuum cleaner or dry rag to dispose of the dust deposited on the wind shield
.

The temperature of the incubator refrigeration system will occur after use, so the cleaning of this piece is good to stop
after the constant temperature and humidity experimental chamber is stopped for half an hour.

Precautions for constant temperature and humidity incubator 1, constant temperature and humidity incubator in the installation settings, pay attention not to let dust, thread, iron filings or other things enter, otherwise it will cause the incubator to have wrong action or failure
.

2, use a dry cloth to wipe the constant temperature and humidity incubator, do not use alcohol, gasoline or other organic solvents, do not splash water on the incubator instrument, if the instrument is immersed in water, it should be stopped immediately, otherwise there is a risk
of leakage, electric shock or fire.

3.
When the constant temperature and humidity incubator is running, if you want to modify the settings, signal output, start, stop and other operations, you must fully consider the safety of the operation, and the wrong operation will cause damage or failure
of the working equipment.

4.
The wiring of the constant temperature and humidity incubator is correct and should be grounded
.

Not grounding may cause electric shock, wrong action, abnormal display or large
measurement error.

5.
Regularly check the terminal screws and fixing frame of the constant temperature and humidity incubator, which cannot be used
in the case of loosening.

6.
During the operation of the constant temperature and humidity incubator, the power input terminal cover is installed on the terminal plate to prevent electric
shock.

7, constant temperature and humidity incubator internal parts have a life period, in order to continue to use the incubator safely, to carry out regular maintenance and maintenance
.

When the incubator is scrapped, it should be disposed of
according to industrial waste.

8, constant temperature and humidity incubator shell effective grounding, to ensure the safety of use, the incubator should be placed in the room with good ventilation conditions, flammable and explosive materials can not be placed around it, the incubator box items should not be overextruded, leaving space
.

9.
The inside and outside of the constant temperature and humidity incubator should be kept clean every day, and the plastic dust cover should be covered for a long time without use, and placed in the drying room
.