-
Categories
-
Pharmaceutical Intermediates
-
Active Pharmaceutical Ingredients
-
Food Additives
- Industrial Coatings
- Agrochemicals
- Dyes and Pigments
- Surfactant
- Flavors and Fragrances
- Chemical Reagents
- Catalyst and Auxiliary
- Natural Products
- Inorganic Chemistry
-
Organic Chemistry
-
Biochemical Engineering
- Analytical Chemistry
-
Cosmetic Ingredient
- Water Treatment Chemical
-
Pharmaceutical Intermediates
Promotion
ECHEMI Mall
Wholesale
Weekly Price
Exhibition
News
-
Trade Service
Everyone may not know much about the waterway of the high and low temperature alternating humidity and heat test box, and rarely clean up, Liuqin Technology will talk about the waterway cleaning
of the high and low temperature alternating humidity and heat test box.
Open the sealing plate on the right side of the device, the waterway on the right and the circuit system
on the left.
The waterway system is the key to the humidity of the test chamber, and daily maintenance is also necessary
.
1.
Open and turn off the total power supply of the machine room door of the high and low temperature alternating humidity and heat test box; 2.
Twist the drain valve and shoot the water back into the bucket; 3.
Pull out the return pipe, pull out the pumping motor and power connector; 4.
Press the water outlet with your hand when there is a leakage at the outlet of the pumping motor and quickly pour the water from the bucket; 5.
Return to the original position after cleaning the various components of the waterway; 6.
Put distilled water or pure water into the bucket and turn off the drain valve; 7.
Turn on the main power supply, and the waterway will run
again.
Although the screw is small, its role is incalculable, and it is an indispensable part
of the entire machine.
Each component of the test chamber is indispensable, the daily maintenance of the components is done, and the high and low temperature alternating humidity and heat test chamber can work
normally.
