Clean method of oral liquid filling and sealing machine

Oral liquid filling and sealing machine is used to fill all kinds of liquids, including all kinds of drinks, medicines and so on Because the filling is liquid, the container of the liquid filling machine must be kept clean The filling container used must be checked and cleaned strictly, so as not to pollute the filled beverage 1 Keep the pipeline of liquid filling machine clean All pipelines, especially those in indirect or direct contact with the materials, shall be kept clean, washed every week, drained every day and sterilized every time Ensure that the filling machine is clean, and the material tank shall be brushed and sterilized to ensure that the parts in contact with the materials are free of scale and bacteria 2 In the production process, it is a good method for Zui to ensure the biological stability sterilization of bottled drinks It is necessary to control the sterilization time and temperature to ensure the final effect of Zui In addition, it is necessary to avoid too long sterilization time or too high temperature to reduce the oxidation of drinks After sterilization, it is necessary to cool down as soon as possible so that the temperature does not exceed 35 ℃ Low temperature filling is a low requirement for beverage filling Zui Under normal circumstances, the beverage is not easy to foam in low temperature environment, and is conducive to filling Before each operation of the filling machine, use 0-1 ℃ water to reduce the temperature of the filling machine tank and transmission pipeline When the filling temperature exceeds 4 ℃, lower the temperature first and then carry out the filling operation Use the heat preservation tank and constant temperature irrigation to keep the material at a certain constant temperature within the specified filling time, so as to avoid the unstable operation of the filling machine due to the excessive temperature change In addition, the filling equipment Zui shall be well isolated from other equipment The lubrication part of the filling machine and the filling material part shall prevent cross contamination The lubrication of the conveyor belt shall use special soap water or lubricating oil In addition to the cleaning of the filling machine, it is necessary to keep the filling workshop clean and tidy In the production process, Zui taboo that the production line can not operate normally due to the quality problems of the filling machine itself, so when using the filling machine, attention should be paid to sterilization, to ensure clean and low-temperature filling.