-
Categories
-
Pharmaceutical Intermediates
-
Active Pharmaceutical Ingredients
-
Food Additives
- Industrial Coatings
- Agrochemicals
- Dyes and Pigments
- Surfactant
- Flavors and Fragrances
- Chemical Reagents
- Catalyst and Auxiliary
- Natural Products
- Inorganic Chemistry
-
Organic Chemistry
-
Biochemical Engineering
- Analytical Chemistry
-
Cosmetic Ingredient
- Water Treatment Chemical
-
Pharmaceutical Intermediates
Promotion
ECHEMI Mall
Wholesale
Weekly Price
Exhibition
News
-
Trade Service
If the automatic liquid filling machine is properly maintained, it can not only effectively ensure that it will not often fail when in use, but also can extend the life of use, so the maintenance of the liquid filling machine is a very important thing
.
How to do the maintenance of the work is better, is a question in the minds of many people, Shanghai Shenggang for you to introduce the liquid filling machine maintenance of the key points
.
1, usually do a good job in the inspection of the liquid filling machine, the main check whether the various components of the equipment are damaged, and whether the small parts are loose, if there is a timely handling work, so as to effectively prevent the liquid filling machine from failing or damaging the body
when it is in use.
2.
The automatic liquid filling machine should maintain cleanliness, and do not let the equipment have oil, debris and excessive dust, so as not to affect
the work of liquid filling.
3.
After each adjustment of bottle spacing, bottle height or adjustment of other parts, be sure to screw the screws, etc.
, and then confirm with a wrench to ensure that it can meet the standard
.
4, in the winter, if the weather is cold, before using liquid filling estimates, remember to let the equipment first preheat in the beginning of use, if the air filter and the oil mist two parts due to low temperature and ice, remember to use hot water towels for thawing
.
After the end of the day, the water in the equipment should be cleaned before leaving, if there is a material that is easy to freeze, then it is necessary to ensure that the ambient temperature of the liquid filling machine is not too low
.
5, long-term do not need to use the liquid filling machine to carry out a large inspection, the main inspection of the parts of the power supply, air source and whether the various components are damaged, if there is no problem, then clean can be used, if there is a problem, then do a good job of replacement
.
