Application process of online dust monitoring equipment

The dust monitoring system mainly includes dust monitor and environmental monitoring cloud platform
.

It can realize regional linkage and know in real time whether each monitoring data in the region exceeds the standard
.

Widely used in construction sites, chemical plant parks, manufacturing enterprises and other environments
.

The application process of the dust monitoring system 1.
Start The dust monitoring system will automatically switch on and off when it is powered on, and use a USB power plug for power distribution (it is recommended to use a 5V1A adapter with a CCC mark)
.

In the first application, the indoor formaldehyde sensor must be stable for a period of time, please wait patiently until the marked value is stable before applying
.

2.
Connect to the network equipment Make sure the mobile phone is connected to Wi-Fi, and place the same wireless router coverage area on the mobile phone and the machine
.

Open the App to select the device equipped with Wi-Fi
.

3.
Receiving data The default setting of the system software is to refresh the data every five minutes.
Short press the function key of the test base or lower the App display screen to actively start the update (the sensor must be stable for a short time, and it is recommended to read the article after the data information is stable)
.

4.
Turn off the screen Long press the function key of the base of the detection dust monitoring system for 3 seconds to turn off the screen, and short press the function key of the inspection base to illuminate the display
.

5.
The key point design scheme inspection small box has an air inlet on the back and the right side, the reverse side is for PM2.
5 measurement, and the right side is for formaldehyde detection.
Fluid dynamics design scheme for air ducts, indoor formaldehyde, PM2.
5 The separate tests do not affect each other
.

The base also has two air inlets, on the back and the left side, to ensure that the temperature and humidity are recorded
.

 　　There is a charging port on the back of the base and the test box.
The base does not have its own rechargeable battery.
It needs to be connected to the switching power supply application according to the charging port.
The test box is equipped with a 900mAH large-capacity lithium battery.
The anti-distribution design scheme of the small box can also temporarily distribute power to the base without switching power supply, and the design scheme is very comprehensive
.

 　　6.
The screen prompts based on the main parameter data information of the air quality index detected today, and gives effective gas improvement suggestions according to the visualization of the sign, prompting whether the window can be opened for ventilation, whether it should be humidified or dehumidified, and if the sign becomes Bright red indicates poor air quality, and measures to purify indoor air should be carried out
.