Application of titanium rod filter in industrial filtration

Titanium filter filter (including tubular and plate type) is made of industrial high-purity titanium powder (99.
4%) as raw material, after sieving, cold isostatic molding, high temperature, high vacuum sintering
.

Therefore, the titanium filter element with its high-tech material composition and special molding process, so that it has ** excellent performance: 1, the structure is uniform, the pore size distribution is narrow, the separation efficiency is high 2, the porosity is high, the filtration resistance is small, the penetration efficiency is high 3, the high temperature resistance, generally can be used normally below 280 degrees 4, the chemical stability is good, the acid and alkali corrosion resistance, the oxidation resistance 5, no particulate shedding, do not make the original solution form secondary pollution, in line with food hygiene and pharmaceutical GMP requirements 6, good mechanical properties, Pressable filter can be pumped, simple operation 7, low pressure difference, small footprint, large flow 8, strong antimicrobial ability, not interacting with microorganisms 9, good molding process, the overall welding length up to 1000 mm 10, can be regenerated online, easy to clean, long service life filter element parameter filtration accuracy: 0.
2um-100um porosity: 28-50% air permeability: 0.
02-20M3cm/m2h.
mmH2O compressive strength: 0.
5-1.
5Mpa temperature resistance : 280°C (wet) ** Large working pressure difference: 0.
6Mpa Specification Model Diameter: Φ22mm Φ30mm Φ50mm Φ60mm Φ80mm Φ100mm Φ120mm Length: 5 inches (125mm) 10 inches (250mm) 12 inches (300mm) 20 inches (500mm) 30 inches (750mm) 40 inches (1000mm) Interface Form: M20 interface M30 interface 222 interface 226 interface filtration accuracy: 0.
22 microns 0.
45 microns 1 micron 3 microns 5 microns 10 microns 20 microns 30 microns 50 microns 80 microns 100 microns