Application of epoxy resin adhesive in shipbuilding industry

When installing ship components, the use of adhesives can simplify processes, improve quality, reduce labor intensity, shorten shipbuilding cycles, and reduce manufacturing costs.
installation of the ship's main sub-pilot, the ship's main sub-pilot must ensure the consistency of the axle line. In the past, it used to be a deline or spherical gasket to secure the machine, which required a lot of fitter grinding and

. And labor intensity, grinding iron sand flying, seriously endangering the health of workers. First use epoxy adhesive to fill the gap between the steel gasket and the seat to install the main sub-machine, can not be grinding, reduce the labor intensity of workers. The installation of the main sub-machine gasket with epoxy adhesive not only has a large adhesion to the metal, but also has a certain mechanical strength of compression, shock, shearing and so on, especially the pressure strength as a gasket is sufficient.
2. The installation of the ship's shaft and propeller, the installation of the ship's shaft and propeller, in the past has been using keyed connection. Now the use of epoxy adhesive installation, fundamentally eliminate the grinding work of the shaft, greatly simplify the process, not only greatly reduce the labor intensity of workers, shorten the shipbuilding cycle, but also improve the anti-corrosion performance of the shaft, solve the difficulty of dismantling the propeller. Removing the bonded spiral slurry can be heated by flame, which has no effect on the pitch.
3. The center correction of the host guide plate, previously, the ship host guide board has been using the cable-pulling method to correct the center, its process is complex, and the quality is not easy to ensure, the adhesive is used to fill the guide plate gap, once set out the center, after curing the center position can be fully guaranteed, greatly saving work hours, reducing the labor intensity of workers.
4. Sticking a variety of kits in place of pressure cooperation, all kinds of valve seat fixing in the past with pressure cooperation, processing accuracy is high, assembly difficulties, quality is not easy to ensure, in addition, processing due to careless work and car loose shaft sleeve, shaft hole loose, etc. can also use adhesive adhesive, can simplify the process, greatly save labor, reduce losses.
.