Application configuration description of the heat transfer oil cooling and heating integrated machine

Heat conduction oil cold and heat integrated machine is supporting the reactor for refrigeration and heating temperature control, the temperature cooling of the experimental reaction is the condition required for the reaction, which is related to the quality of the entire finished product production, then, what are the configuration instructions of the heat conduction oil cold and heat integrated machine? The heat transfer oil cold and heat integrated machine selects the reactor temperature control system through the cooling coil, the cooling coil is equipped with cooling inlet and outlet, cooling water, refrigerant and external circulating coolant
.

Regarding the orientation of the device for cooling coils of the thermal oil cooling and hot integrated machine, the device is usually inside the reactor to reduce the temperature of the material in the reaction, and can be placed outside when the material viscosity is large or the coil requires a mixing mode; In the case where the medium is used as a heating source, the cooling coil can be placed in the medium, and the heating of the resistance wire depends on the specific situation, but the heating action and cooling effect
should be considered.

The heat transfer oil cooling and heating machine can be operated in a gap or continuous operation or semi-continuous operation
.

It can be operated by a single kettle or in series by multiple kettles
.

The heat transfer oil cold and heat integrated machine is widely used, flexible operation, and the concentration is easy to control
.

It usually consists
of a kettle body, a heat exchange device, a mixer and a heat transfer device.

The heat transfer oil integrated machine is widely used in industrial production and is suitable for the reaction
of various phase materials.

The heat transfer oil cold and hot integrated machine is equipped with different types of stirring and heat transfer devices
.

Heat transfer device commonly used in heat transfer oil cooling and heating integrated machines: jacket and snake tube
.

There is also electric induction heating, direct steam heating or external heat exchanger heating
.

The heat transfer devices commonly used in the heat transfer oil cooling and heating integrated machine are jackets and snake tubes, as well as electric induction heating, direct steam heating and external heat exchanger heating
.