Application and cleaning process of disposable sampling tube filling machine

Disposable sampling tube filling machine is suitable for normal pressure filling equipment for glass, plastic, metal and other containers in the pharmaceutical, chemical, food, light industry and other industries, such as nucleic acid detection reagent filling machine, oral liquid plastic bottle, wind oil Refined bottle, eye drop bottle, cosmetic perfume bottle, battery fluid filling,
etc.


The disposable sampling tube filling machine is composed of bottle feeding turntable, bottle feeding, aliquoting plate, filling system, inner plug and outer cap oscillator, capping system, bottle output track and electronic control
.

Relying on the positioning of the aliquot plate, the cam drives the needle to move up and down for filling, and the filling action is completed at one time
.

Through the turntable and bottle feeding, the equalization plate positioning and filling, oscillating the stopper, the manipulator moving the inner stopper, adding the outer cap, and screwing the cap, the bottle out action is completed.
The diameter of the container to be filled should be small, and the expansion stress of the liquid surface in the diameter should be It is greater than the hydrostatic pressure, which means that the liquid will not flow out by itself after the container is inverted
.

Such as oral liquid plastic bottles
.

Sampling tube, balsamic oil bottle, eye drop bottle, cosmetic perfume bottle,
etc.

The disposable sampling tube filling machine is simple in structure, reliable and has few failures; it adopts a conical piston, which has good sealing performance, accurate liquid dispensing and easy adjustment of liquid volume; the liquid contact parts are made of stainless steel, which is easy to load and unload Aseptic dispensing; The cylinder, push rod and piston are made of stainless steel, which is corrosion-resistant and wear-resistant; the speed is continuously adjustable, and the operation is convenient
.


The cleaning process of the disposable sampling tube filling machine: the liquid can be drained from the drain port, rinsed with clean water, and cleaned with a non-woven cloth
.

Before the operation, clean the sterile preparation or the 10,000-level area, and then wash it with water for injection, rinse three times for 5 minutes each time, until there is no residue, and then use 75% alcohol to clean the parts in contact with the material, and the inspection results are all indistinguishable Clean the traces before entering the filling process, close the vent valve, the liquid inlet valve, turn on the vacuum pump, adjust the vacuum connection valve to make the vacuum degree meet the process requirements, step on the foot pedal to insert the liquid into the bottom of the bottle to be filled, and the container to be filled.
The caliber should be small, and the expansion stress of the liquid surface in the caliber should be greater than the hydrostatic pressure, that is to say, the liquid will not flow out by itself after the container is inverted.
The fluid level is maintained between the fluid levels specified in the sight glass
.

When the pointer of the vacuum gauge is in the 0 state, it proves that the filling is completed, and the foot collapse plate is returned, and the quick-opening tank cover can be opened to take out the filled liquid bottle
.