Analysis of some common faults of cartoning machine

Analysis of some common faults of the cartoning machine 1) The conveyor belt is stopped or stopped at the gap: 1.
Check whether there is a lack of material when the gap is stopped, and supplement the automatic start
.

2.
Stop the machine to check whether the power supply including the power supply part, the motor or the governor is normal
.

 2) The carton cannot be sucked down: 1.
Whether the carton is neatly placed
.

2.
Whether the carton is pasted together
.

3.
Whether the air pressure of the suction head is normal
.

 3) After the carton is sucked down, it does not form or pops out at the mouth of the feeding template: 1.
Check whether the carton is too hard
.

2.
Check whether the position of the guide rod for placing the carton and the box feeding template is not correct
.

3.
Check whether the small hook spring at the rear of the box feeding template is deformed
.

4.
Check whether the height of the suction head of the suction box and the box feeding track is correct
.

 4) The instruction manual cannot be sucked down: 1.
Whether the instruction manual is deformed, causing the suction head to not suck
.

2.
Whether the suction head gas is parallel to the instruction manual
.

3.
Whether the width and size of the paper in the manual are different, the error must be within 1mm
.

The adjustment of the stacking position of the manual should be 0.
5mm away from the inner edge when the suction head rises to the highest position
.

4.
The small hook above the suction head of the origami machine moves too early
.

Generally, the small hook should be inserted into the gap between the paper and the paper before the suction head is about to descend
.

The adjustment of the height of the small hook is 0.
5mm when the suction head is at the highest position
.