Advantages of water-based inks in the printing of plastic products

Plastic water-based ink is composed of water-based resin, additives, pigments, water and other raw materials

Environmental advantages of water-based inks

Since water is used as a solvent for plastic water-based inks, there is no organic solvent (VOC) volatilization and no odor during the printing process

Advantages of water-based inks in printing costs

When printing with water-based inks, it does not need to be diluted with any organic solvents, just clean water

At present, when purchasing inks in the printing industry, some companies only look at the surface price and do not consider other aspects

First using water-based ink is better hardware, such as good drying equipment, like a pale version

The production of water-based inks is different from that of inks, so its sales methods are different.

Conditions and precautions for using water-based inks

You must understand the characteristics of water-based inks before using water-based inks

According to the amount of water-based ink required for daily printing, it is best to use a large bucket for uniform dilution (add water)

After the water-based ink is poured in the ink tank, the printing plate should be rotated for 2-3 minutes for the purpose of stirring and dampening
.
Do not put down the scraper at this time .
Some printing companies still have to stop the traction film, and the printing plate stops rotating for too long, which causes the plate to jam
.
Because water-based ink is different from ink, the printing plate can be re-dissolved by rotating the printing plate after the ink is blocked and the blocking phenomenon can be eliminated
.
However, the water-based ink will not re-dissolve, if the plate is blocked, the plate must be washed again, which will affect the work efficiency
.

After printing, pour the water-based ink back into the bucket, seal it, and save it for later use
.
Use clean water to clean the printing plate, the action must be fast
.
If the water-based ink is not yet dry, it can be cleaned completely with clean water
.
If there is a clogged plate, it can be cleaned with soap powder and boiled water, or it can be cleaned with a solvent.
For all washing water and handwashing water, it is best to establish several pools for sedimentation and filtration, so as not to pollute the groundwater source
.