Advantages of vibrating fluidized beds for drying materials

The principle of vibration fluidized bed drying: the material enters the machine at the inlet port, under the action of the vibration force, the material is thrown forward continuously along the direction of the fluidized bed, and the hot air flows upward through the fluidized bed and the wet material after heat exchange, after cooling by the cold air, the wet air is discharged by the exhaust port after being dusted by the cyclone separator
, and the dry material is discharged by the discharge port.
The characteristics of vibration fluidized bed drying: 1, the material is evenly fed, the heat exchange is sufficient, the drying strength is high, and it is about
30% more energy-saving than the ordinary dryer.
2.
The vibration source is driven by vibration motor, which runs smoothly, is convenient for maintenance, has low noise and long
life.
3.
Fluidization is stable, and there is no dead angle and blowing through phenomenon
.
4.
Good adjustability, adapt to the width of the surface, the thickness of the material layer and the speed of movement in the machine and the amplitude change evenly can achieve stepless speed regulation joint
.
5.
The surface damage to the material is small, which can be used for the drying of fragile materials, and the working effect
is not affected when the material particles are irregular.
6.
The fully enclosed structure is adopted, which effectively prevents the cross-pollution of materials and air, and the working environment is clean
.