-
Categories
-
Pharmaceutical Intermediates
-
Active Pharmaceutical Ingredients
-
Food Additives
- Industrial Coatings
- Agrochemicals
- Dyes and Pigments
- Surfactant
- Flavors and Fragrances
- Chemical Reagents
- Catalyst and Auxiliary
- Natural Products
- Inorganic Chemistry
-
Organic Chemistry
-
Biochemical Engineering
- Analytical Chemistry
-
Cosmetic Ingredient
- Water Treatment Chemical
-
Pharmaceutical Intermediates
Promotion
ECHEMI Mall
Wholesale
Weekly Price
Exhibition
News
-
Trade Service
Si4000 xenon lamp aging tester is a domestic experimental equipment independently developed and produced by our company Shanghai Qianshi Precision Electromechanical Technology Co.
, Ltd.
It is used to test solar photovoltaic, plastic, paint, packaging, automotive materials, and textile industries including geotextiles, pigments, stabilizers, Weather resistance of materials such as additives
.
Main parameters: 01.
Light source: 6500W water-cooled xenon lamp tube; 02.
Spectral range: full-spectrum sunlight; 04.
Irradiance control accuracy: ±0.
1W/m2 of the set value; 05.
Irradiation intensity on the surface of the sample is uniform: ≦±4%; 06.
Irradiance control point : 340nm, 420nm, 300-400nm, 400-750nm, etc.
can be selected; 07.
Blackboard temperature closed-loop control range: BST: 40～120℃; BPT: 40～110℃; 3 layers; 09.
Total exposure area: 6500cm2
.
Advantages and characteristics: 1.
The company has been engaged in testing instruments for more than ten years, and has a strong after-sales service team; 2.
It can handle various problems in a timely and fast manner, and relieve customers' worries; 4.
Provide outsourced maintenance services; 5.
Long-term supply of various common testing instruments; 6.
Keep up with the update of industry standards and provide testing instruments that meet new standards in a timely manner
.
SAE J1960 is the test method for Accelerated Exposure of Automotive Exteriors Using a Water-Cooled Xenon Lamp Unit with Controlled Irradiance
.
The exposure conditions in SAE J1960 are as follows: 1.
During the light cycle, the irradiance is controlled at 0.
55W/m2/nm@340nm; 2.
UV extension filter (quartz inner filter/borosilicate outer filter); 3.
70℃ black panel temperature 4.
20 minutes of light and water spray to spray the front of the sample; 5.
38°C blackboard temperature, 60 minutes of light, 50% relative humidity; 6.
38°C blackboard temperature , 60 minutes of dark water spray, spray the front and back of the sample; 7.
The sample position remains unchanged
.
, Ltd.
It is used to test solar photovoltaic, plastic, paint, packaging, automotive materials, and textile industries including geotextiles, pigments, stabilizers, Weather resistance of materials such as additives
.
Main parameters: 01.
Light source: 6500W water-cooled xenon lamp tube; 02.
Spectral range: full-spectrum sunlight; 04.
Irradiance control accuracy: ±0.
1W/m2 of the set value; 05.
Irradiation intensity on the surface of the sample is uniform: ≦±4%; 06.
Irradiance control point : 340nm, 420nm, 300-400nm, 400-750nm, etc.
can be selected; 07.
Blackboard temperature closed-loop control range: BST: 40～120℃; BPT: 40～110℃; 3 layers; 09.
Total exposure area: 6500cm2
.
Advantages and characteristics: 1.
The company has been engaged in testing instruments for more than ten years, and has a strong after-sales service team; 2.
It can handle various problems in a timely and fast manner, and relieve customers' worries; 4.
Provide outsourced maintenance services; 5.
Long-term supply of various common testing instruments; 6.
Keep up with the update of industry standards and provide testing instruments that meet new standards in a timely manner
.
SAE J1960 is the test method for Accelerated Exposure of Automotive Exteriors Using a Water-Cooled Xenon Lamp Unit with Controlled Irradiance
.
The exposure conditions in SAE J1960 are as follows: 1.
During the light cycle, the irradiance is controlled at 0.
55W/m2/nm@340nm; 2.
UV extension filter (quartz inner filter/borosilicate outer filter); 3.
70℃ black panel temperature 4.
20 minutes of light and water spray to spray the front of the sample; 5.
38°C blackboard temperature, 60 minutes of light, 50% relative humidity; 6.
38°C blackboard temperature , 60 minutes of dark water spray, spray the front and back of the sample; 7.
The sample position remains unchanged
.
