echemi logo
Product
  • Product
  • Supplier
  • Inquiry
    Home > Coatings News > Paints and Coatings Market > A waste acquisition station on the round-the-island road caught fire suspected of cutting splattered Martian fuel paint

    A waste acquisition station on the round-the-island road caught fire suspected of cutting splattered Martian fuel paint

    • Last Update: 2021-03-06
    • Source: Internet
    • Author: User
    Search more information of high quality chemicals, good prices and reliable suppliers, visit www.echemi.com
    China Paint Network
    News: March 6 at 2 pm, a single-story iron house in Huangxuan, around the island road caught fire, the entire plant was engulfed by fire, adjacent stone processing plant and two factories on both sides are threatened. Workers to self-help and timely alarm, the fire department quickly disposed of, no people trapped, did not cause major damage.
    Round-the-island road a waste acquisition station fire suspected of cutting splash mars ignition
    paint
    reporters arrived at the scene at 3 p.m., the car to the National Accounting Institute, you can see the direction of the yellow smoke, the air filled with a scorching smell. Because the fire site is nearly 1 km from the ring island road fire hydrant, to the fire fighting work brought some trouble, firefighters can only lay long distances of water pipes to the scene of the fire.
    came to the fire near the factory building, but also can see the roof of the tin house burst into flames. Firefighters divided into two routes, from the front and rear sides of the plant to the broken gap to spray water inside, the roof side of the burning plant was burned down, from time to time issued a "cracking" sound, a burning smell came.
    , according to witness Mr. Mao, the fire plant is mainly recycled cans and paint barrels to compress, there are several compression machines in it. "I also saw their workers at work this morning, the machine was very loud, stopped for a while at noon, and at about 1:30 p.m. I saw black smoke coming out and slowly the fire was getting bigger and bigger." Mr. Mao said that the plant area of about 300 square meters, which has been compressed into a lot of aluminum, iron products.
    reporters at the scene learned that the cause of the fire may be a welder in the plant operating machine cutting, compression cans, Mars splashed up and ignited the surrounding waste paint barrels in the residual paint, and then caused a fire.
    according to the scene personnel, there were 4 people in the factory building at the time of the fire, saw the fire, several workers want to put out the fire themselves, but at that time did not control the spread of the fire, immediately called the police. When community workers arrived, they evacuated people from the surrounding tin houses and rescued two gas canisters from a scrap station on the edge.
    received the alarm, Xiamen Fire Brigade quickly sent 4 squadrons, 15 fire engines rushed to the scene to fight the fire, in the strong water spray, the fire was put out. In order to completely eliminate the residual culvert fire, to avoid resurgent, fire fighters will have burned down the iron house demolition, the burning part of the water for water, the whole rescue lasted more than an hour.
    , the owner and workers of the scrap station are being questioned by the police and the cause of the fire is under further investigation.
    This article is an English version of an article which is originally in the Chinese language on echemi.com and is provided for information purposes only. This website makes no representation or warranty of any kind, either expressed or implied, as to the accuracy, completeness ownership or reliability of the article or any translations thereof. If you have any concerns or complaints relating to the article, please send an email, providing a detailed description of the concern or complaint, to service@echemi.com. A staff member will contact you within 5 working days. Once verified, infringing content will be removed immediately.

    Contact Us

    The source of this page with content of products and services is from Internet, which doesn't represent ECHEMI's opinion. If you have any queries, please write to service@echemi.com. It will be replied within 5 days.

    Moreover, if you find any instances of plagiarism from the page, please send email to service@echemi.com with relevant evidence.