6 points that must be remembered before using the xenon lamp aging test chamber

Xenon lamp aging test chamber is used to simulate the * phase of outdoor product materials, observe whether there is discoloration, discoloration, gloss decline, powdering, cracking, embrittlement, strength reduction and other phenomena
.

It can also reproduce the destructive effects
of rain and dew at the same time.

It takes days or weeks to reproduce the hazards that last for months or even years outdoors
.

Xenon lamp aging test chamber should pay attention to the following precautions before use: 1, before using this test chamber to confirm whether the wiring of the equipment is correct and whether it is truly grounded
.

2.
In order to ensure that the equipment and the operator will not be in danger, please check whether the water pressure controller of the test chamber and the water level of the circulating water tank are normal
.

3.
When the test chamber is tested
.

Except for special circumstances, please do not open the test chamber door at will, so as to avoid adverse consequences
.

For example, during a high-temperature test, the high-temperature gases in the chamber will flush out of the chamber, most likely scalding the operator
.

During cryogenic tests, the operator
is frostbitten.

Before opening the box, the operator should take protective measures
.

4.
Check whether the installation position of the wet ball gauze is correct to ensure that the equipment can obtain the correct relative humidity
during the test.

5.
Xenon lamp aging box is prohibited from testing explosive, flammable and highly corrosive items
.

6.
Before the installation of the xenon lamp aging test chamber, the heat dissipation of the equipment and the maintenance space at normal times
should be fully considered.

About 60cm of space should be reserved around the
device.