16 products of Jitai Co., Ltd. obtained China Green Product Certification

On June 3, a total of 16 products including 13 sealants and 3 coatings of Jitai Co.

China Green Product Certification is a product green development level certification issued by a certification body on behalf of the country

Jitai shares "China Green Products" camp

Antai-Silicone weathering glue for building curtain wall 193-25

Antai-silicone structural sealant for building curtain wall 169-25

Antai-silicone structural sealant for building curtain wall 168-25

Antai-two-component silicone structural sealant for insulating glass 166

Antai-flame retardant sealant for construction 176

Antai-Two-component silicone sealant for insulating glass 165

Antai-Highly Elastic Silicone Weatherproof Sealant 198

Antai-system door and window special neutral silicone sealant 611

Antai-DJ-A3-AT178 fireproof sealant

Antai-Neutral Silicone Weather Resistant Adhesive 193

Antai-modified silicone sealant 332

Antai-modified silane sealant 352

Antai-Moldproof Sealant 636

Long-lasting anti-mold glue

Jitai JT-233M water-based two-component polyurethane topcoat

Jitai NP-1002Z Acrylic Waterborne Nano Thermal Insulation Intermediate Paint

Jitai NP-1002G Acrylic Waterborne Nano Thermal Insulation Intermediate Paint

Among them, the full life cycle management of products by enterprises mentioned in China’s green product certification refers to the reduction of hazardous substances and energy saving from product development and raw material selection, product production, product transportation, product use, and product recycling.

As a leading company in the industry, Jitai Co.

The company has improved the standards of high-quality development and realized fully automated and intelligent production

01

Factory construction

Efficient use of space to achieve intensive land use

In the optimization of the internal layout, a production warehousing and logistics transportation platform was set up nearby, which shortened the production process and greatly eased the pressure on warehousing

02

Product development

Replace hazardous materials and improve environmental performance

In consideration of cost, environmental impact, product performance, regulatory requirements, best available technology, and customer needs, Jitai shares give priority to choosing green and environmentally friendly raw materials to replace hazardous materials.

At the same time, the company has established a green supply chain management system, through a sound management and evaluation system, performance management, and imposed green environmental protection requirements on the supply chain to increase the purchase of green environmentally friendly raw materials and reduce the use of toxic and hazardous substances
.

03

Clean manufacturing

Fully automatic green production, the per capita efficiency is increased by 3 times

Jitai has introduced 4 domestic most advanced fully automatic screw production lines and 7 global most advanced fully automatic color glue production lines to realize fully automated production and green production process, which not only guarantees stable product quality, but also improves per capita efficiency 3 times, the unit loss efficiency is reduced by 80%; and the production process is closed, a small amount of dust generated during the mixing process must be collected by a closed draft hood and then treated by a pulse dust removal device; the waste water generated by the cleaning equipment flows to the factory sewage The treatment station adopts advanced microbial metabolism treatment technology for treatment, and discharges only after reaching the requirements
.
 

At the same time, the production mainly uses clean energy such as water and electricity, as well as a very small amount of diesel, which greatly reduces carbon pollution
.
And since 2019, electric forklifts in Jitai Green Factory have completely replaced diesel forklifts, achieving pollution-free and pollution-free emissions
.

04

product testing

High-standard testing, 100% pass rate of products leaving the factory

Jitai Stock Testing Center is a CNAS nationally accredited laboratory.
It uses ISO9001-2015, IATF16946-2016 and other quality management systems to strictly formulate the testing procedures for raw materials, semi-finished products, and finished products to ensure a 100% pass rate of products
.

05

Waste utilization

Raw material recycling, comprehensive utilization rate 90%

Jitai Co.
, Ltd.
actively promotes the recycling of waste and makes it recyclable
.
During the production process, the raw material packaging barrels are recycled by the supplier for the original purpose
.
The waste equipment is dismantled, and the parts are used for equipment maintenance, and the comprehensive utilization rate of recyclable solid waste reaches more than 90%
.

In terms of the utilization of clean wastewater, the qualified sewage treated by the self-built sewage treatment station is mainly used for watering flowers and trees, circulating water for toilets, cleaning of mixing tanks, supplementation of fire pools, etc.
to achieve secondary recycling and realize waste recycling
.

06

Custom production

Customer bill of lading to scheduling, completed within 1 working day

The traditional production method of the sealant industry is mass production, and then shipments on order
.
Jitai has introduced automated production equipment and informatized online processes to transform the traditional production method into a build-to-order production, and regular products maintain a reasonable inventory
.
It can be completed within 1 working day from the customer's purchase request to the conversion into internal orders and production scheduling
.

Supported by online processes, small batches and multi-batch production can meet customer customization requirements, avoid bottlenecks in human processing processes, and achieve separation of information flow, logistics, and financial flow and quick response
.

Build a century-old store

Help green always

From building a "green factory" to selling "green products" all over the country, Jitai shares promotes the greening of the industrial chain, and promotes the transformation of the entire industry to a green production method featuring resource conservation, clean production and high-end products, which is proved by practical actions " "Chemical" enterprises can also be green enterprises, which also provides a model for the green development of the sealant industry industrial chain
.

The 16 products of Jitai Co.
, Ltd.
have obtained the China Green Product Certification, which will help improve the overall environmental protection level of the products and enhance the core competitiveness of the brand
.
As a local national enterprise in China, Jitai has been adhering to the development vision of "building a century-old store and wishing to be green", and has always been a loyal practitioner of environmental protection, and will continue to work hard to create a more beautiful and healthy green earth
.