-
Synthesis and properties of nanorod-shaped strontium hydroxystannate
Time of Update: 2020-10-20
significantly reduces the fire hazard of epoxy resins the flame retardant and smoke-suppressant properties of EP/SrSn(OH) 6 composites are studied by the Extreme Oxygen Index and the tapered heat method.
-
Hansen Quarterly 2019 Report: Total full-year revenue of EPS, phenolic and coating resins was $1.88 billion!
Time of Update: 2020-10-20
Net sales for the fourth quarter totaled $760 million , down 16% from $904 million the same .
net sales of epoxy, phenolic and coating resins were $417 million in the fourth quarter of 2019, down 14.8 percent from $490 million in the third quarter of 2018.
-
Wanhua Chemistry . . . 90 billion investment in Sichuan Fujian. Seize the strategic highlands of chemical industry in south-west China.
Time of Update: 2020-10-20
Meishan, Sichuan Province. Investment of 40 billion construction of high-performance resin and water-based coatings project Recently, Meishan City 2020 provincial key projects list and Meishan City
-
Synthesis of a novel nano-hyperbranched polymer resin
Time of Update: 2020-10-20
Water-based acrylic as an auxiliary anti-corrosion material, through in-place polymerization synthesis of water-based nano-hybrid overspending acrylic emulsion .
the anti-corrosion properties of water-based nano-hybridized overspending acrylic coatings are indicated by the electrodynamic polarization and electrochemical impedance spectrum.
-
Ruifeng high material: 20,000 tons of epoxy chloropropane project completed, is expected to start production by the end of the year.
Time of Update: 2020-10-17
Recently, Ruifeng Highwood in the interactive platform said: the company's subsidiary Linyi Ruifeng Polymer Materials Co., Ltd. annual output of 20,000 tons of epoxy chloropropane project is currently in the construction phase, is expected to be completed by the end of the year.
-
Effect of promoter on polyester epoxy powder coating properties.
Time of Update: 2020-10-17
3.3 Effects of different promoter dosages on polyester epoxy powder coatings Table 4 test results show that with the increase in the amount of promoters in the formulation, the gel time of powder coating is significantly shortened, the melting level fluidity is also smaller tendency, and the frozen impact performance of the coating film also has a certain impact, the dosage at 0.40 g is the best performance.
-
For the wall exclusive to create "apple light", Dabao paint has a way.
Time of Update: 2020-10-17
At the same time, product development will be eggshell surface touch, soft light effect and other elements cleverly integrated into the paint design to sublimate, use, showing better than the traditional paint surface texture and matte effect, for the bedroom design, wall decoration, soft matching, etc.
-
Offshore oil platform construction of central oxygen-rich zinc primer coating process.
Time of Update: 2020-10-17
Therefore, according to the construction process of offshore oil platform structure, take reasonable and feasible coating process, control all aspects of coating construction, in order to ensure the construction quality of epoxy zinc-rich primer, play its excellent anti-corrosion performance.
-
After the festival resin price stability, Nantong star maintenance, raw material prices suddenly rose.
Time of Update: 2020-10-17
Changchun Chemical Industry: three sets of a total of 150,000 tons / year of epoxy resin plant normal operation, the current epoxy resin E-51 external quotation in 21,000 yuan / ton barrel delivery, real single volume negotiations, smooth shipment.
-
Cosmos will acquire DSM's leading sustainable coating resin business.
Time of Update: 2020-10-17
The integration of RFM will add approximately EUR 1 billion in sales and EUR 141 million in EBITDA (as expected in 2019) to its coatings, adhesives and specialty chemicals (CAS) business unit, which will increase sales by more than 40% to approximately EUR 3.4 billion (as expected in 2019) This acquisition will enable Cosco to become a leading supplier of sustainable coating resins, resulting in an extremely comprehensive and innovative product portfolio that creates a strong customer value proposition.
-
Bauhinia Flower Co-President Feng Bingguang: Bauhinia Flower will be launched to antibacterial antiviral function-based new products.
Time of Update: 2020-10-17
Recently, Mr. Feng Bingguang, Co-President of Bauhinia Paint Group, was interviewed by two authoritative media outlets, Ming Andi and Oriental Daily, in Hong Kong.
-
Jiangxi Hanqiao annual output of 10,000 tons of synthetic resin, 1200 tons of TGIC project EIA publicity.
Time of Update: 2020-10-16
The scope of business includes information chemicals, inks and similar products, electronic materials manufacturing, synthetic resin production and sales; The original project was commissioned in February 2012 by the Environmental Impact Assessment Center of Jiangxi Agricultural University to prepare the "Mixed Packaging Project for Ink and Similar Products with An Annual Output Value of 120 Million Yuan", which was approved by the Planning and Construction Environmental Protection Bureau of Jiangxi Jinggangshan Economic and Technological Development Zone on April 5, 2012.
-
Heavy! Huntsman's $300 million acquisition of CVC, a U.S. manufacturer of special epoxy curing agents.
Time of Update: 2020-10-16
U.S. CVC thermocuring specialty materials products include specialty epoxy curing agents and tougheners, and is a North American manufacturer of specialty chemicals that serve the industrial composites, adhesives and coatings markets.
-
Evonik: launches new synthetic silica SPHERILEX® with excellent durability and abrasion resistance
Time of Update: 2020-10-16
This process gives silicon dioxide a unique spherical particle form, giving it a new advantage in coating applications.
In this wet reaction process, the manufacturer is able to control a number of characteristics of the final product, including pH, surface area, (in-particle) hole volume, aperture distribution, and other structural or morphological features.
-
Ingtrone introduces a new synthetic silicon dioxide for superior durability and wear resistance.
Time of Update: 2020-10-16
The new product achieves superior durability and wear-resistant light, and helps formulation engineers reduce the demand for polymer resins from solid materials in their formulations, reduce solvent use to reduce VOC emissions 1SPHERILEX ® If the above factors can be reasonably controlled, the performance and utility of precipitation of silica will greatly improve the .
-
Formula design and construction of waterborne epoxy floor coating
Time of Update: 2020-10-16
The formulation design and construction of water-based epoxy flooring coatings Shi Xuezhen, Shi Shengjun, Chen Wei (Shanghai Green Jia Water-based Coatings Co., Ltd.) Abstract: Briefly describe the
-
Invest 500 million tons a year to produce 100,000 tons! Construction of a water-based industrial building coating project began in Henan.
Time of Update: 2020-10-16
, Henan Province Huikang Environmental Protection and Energy Saving Materials Co., Ltd. annual output of 100,000 tons of water-based industrial building coatings project investment of 500 million yuan , covers an area of 80 acres.
-
Characteristics of different types of hydroxyl components in polyurethane coatings
Time of Update: 2020-10-16
common hydroxygens are: hydroxypropyl acrylic resin, polyester polyol, polyether polyol, epoxy resin, castor oil or its processed products.
hydroxypropyl acrylic emulsions or dispersions are the most used hydroxyl parts in water-based two-group polyurethane coatings.
-
Latest! Wanhua Chemical, which has surged profits for three years in a row, is about to make an appointment this year!
Time of Update: 2020-10-16
2019, the polyurethane sector contributes about half of Wanhua Chemical's total revenue, with a gross margin of more than 41%, making it the most profitable of the company's three segments.
-
Can epoxy be cured without heating to make composite materials?
Time of Update: 2020-10-16
Research Results Based on this, Professor Robert Liska's team at the Technical University of Vienna uses free-form induced cation front-end aggregation to drive epoxy polymerization (curing) with heat generated during the polymerization process without external heating, greatly simplifying the production process and saving energy consumption.
