-
Acrylic paint
Time of Update: 2021-03-17
The surface of the object to be coated must be free of oxide scale, rust, oil stains, etc.
When the temperature of the substrate is lower than 5℃, the paint film will not solidify, so it is not suitable for construction.
-
With low thermal conductivity-environmental protection interior wall latex paint formula check
Time of Update: 2021-03-17
Recipe details (parts by mass)Production MethodTake water, add dispersant, thickener, wetting agent, and defoamer in turn at 400~700r/min, and disperse for 5min; at 600~1000r/min, add pigments, fillers, and hollow glass microspheres in turn.
-
Fuchsia exterior wall latex paint formula one
Time of Update: 2021-03-17
After the filtration is completed, under low-speed stirring conditions, add wetting agent, defoamer, film-forming aid, emulsion to the above dispersed slurry, and then add thickener to adjust the viscosity to 90~100KU, add pH adjuster to make the pH Value is 8.
-
Yellow exterior wall latex paint formula
Time of Update: 2021-03-17
2. Color paste for latex paint plays a decorative role in architectural coatings and requires excellent dispersion stability, light resistance, weather resistance and compatibility with coatings.
-
Water-based interior wall latex paint formula
Time of Update: 2021-03-17
(1) Add deionized water to the stirred tank, then add preservatives, dispersants, cosolvents, wetting agents, etc.
(4) Add emulsion, film-forming auxiliary, thickener, and defoamer in sequence under low-speed stirring.
-
[Audio explanation] Analysis and countermeasures of whitening and rain marks of real stone paint
Time of Update: 2021-03-17
Solution: Choose high-quality emulsion film-forming materials to improve the water resistance of real stone from the source.
Once it encounters a long time of rainy weather, rain water will penetrate into the paint film, causing the real stone paint to turn white.
-
Zero VOC super environmentally friendly latex paint formula
Time of Update: 2021-03-17
Mix the dispersant, thickener, and defoamer in water, and add pigments and fillers.
Disperse at high speed until the fineness is qualified, and add selected film-forming substances and other additives at low speed.
4, pigments and fillers 20-35, film-forming substances 30-55, Other additives 0.
-
Magenta interior latex paint formula view
Time of Update: 2021-03-17
After the filtration is completed, under low-speed stirring, add wetting agent, defoamer, film-forming aid, emulsion to the above-mentioned dispersed slurry, and then add thickener to adjust the viscosity to 90~100KU, add pH adjuster to make the pH The value is 8.
-
Underwater epoxy resin coating formulation
Time of Update: 2021-03-17
A component preparation: After mixing the pigments and fillers with liquid epoxy resin, grind them with a three-roll machine until the particle size of the pigments and fillers is less than or equal to 30 pm, then add white carbon black, stir evenly, add hollow polymer microspheres, and stir Filter and pack after uniformity.
-
Nano heat-insulating reflective coating formula
Time of Update: 2021-03-17
Prepare primer: first mix components 1~9 in the formula evenly, add functional nanomaterials and stir well, continue to add pigments, fillers, heat insulation materials, and heat radiation materials, disperse them into base materials in a high-speed mixer, and pump them for grinding.
-
Butyl emulsions and PVA powders are used in waterproofing and mortar
Time of Update: 2021-03-17
two-component flexible waterproof coating Model: PRS-2874L+ (under development)Different models of Trinseo's highly environmentally friendly styrene butadiene emulsions have the following solid content, viscosity, Tg value, particle size, applications and characteristics:
-
High strength and elastic epoxy adhesive formulation
Time of Update: 2021-03-17
PrecautionsThe ratio of each component of the high-strength and high-elastic epoxy adhesive is in the range of: epoxy resin 100 epoxy-terminated polysulfide rubber 50~250, polyol 10~50, curing agent 6~12, curing agent Accelerator 1~15, silane coupling agent 0,1~2.
-
Professionally explain the basic knowledge of coatings and analyze the four major properties of coatings
Time of Update: 2021-03-17
The performance of the coating is mainly determined by four parts: the original paint performance, construction performance, paint film performance, and environmental protection performance.
-
[Audio Explanation] Application Analysis of VAE Emulsion in Architectural Coatings
Time of Update: 2021-03-17
VAE emulsion raw materials: ethylene 8000, vinyl acetate 8500.
Disadvantage analysisVAE emulsion is generally a PVA emulsifier system, which is a water-soluble substance, and vinyl acetate is a polar monomer with good affinity with water, so it has poor water resistance.
-
Application of Titanium Dioxide in Coatings and Ways of Sustainable Development
Time of Update: 2021-03-17
Moreover, this surface treatment increases the oil absorption of the titanium dioxide particles and reduces the level of CPVC, so that the presence of air in the coating film can be used to improve the light scattering efficiency in the case of lower PVC.
-
Water-based interior wall environmentally friendly latex formula
Time of Update: 2021-03-17
Then add selected film-forming substances, wetting agents, pH regulators and antiseptics and antifungal agents at low speed, and mix well;
Check the formula of high solids water-based interior wall latex paint Formulation characteristics This product uses a combination of dispersant and wetting agent in the dispersing stage of pigments and fillers.
-
What are the functions of dispersants in coatings?
Time of Update: 2021-03-17
For white paint, the addition of polymer dispersant can reduce the agglomeration of pigments and fillers such as titanium dioxide, reduce the particle size to increase the surface area, and further improve the hiding power.
-
The rapid growth of my country's powder coating industry continues unabated
Time of Update: 2021-03-17
, delivered a speech at the opening ceremony of the exhibition and pointed out that the market share of general industrial, functional (anti-corrosion), agricultural engineering machinery and automotive powder coatings has maintained growth, and the development of coating technology in key industries The trend is mainly energy saving and environmental protection.
-
Special antibacterial interior wall latex paint formula check
Time of Update: 2021-03-17
(4) After the slurry fineness reaches 20μm, stir at medium and low speed, add pure acrylic emulsion and the balance defoamer, stir and mix for 20 minutes, add thickener and leveling agent, adjust the pH to 8, after filtering Packaging, complete the preparation of antibacterial interior wall latex paint.
-
Fuchsia exterior wall latex paint formula (2)
Time of Update: 2021-03-17
After the filtration is completed, under low-speed stirring, add wetting agent, defoamer, film-forming aid, emulsion to the above-mentioned dispersion slurry, and then add thickener to adjust the viscosity to 90~100KU, add pH adjuster to make the pH Value is 8.
