-
Brush latex paint for wall decoration, you must avoid these 8 misunderstandings!
Time of Update: 2021-03-22
Misunderstanding 2: The smoother the grassroots treatment, the betterMost people know that the wall surface should be treated before the latex paint construction to ensure that there are no bubbles, cracks, dust, etc.
-
Problems in the construction of the "divided lines" of water-in-water and sand-in-water colorful paints and the division techniques
Time of Update: 2021-03-22
7. Grid positionIn order to make the spraying effect of the colorful paint closer to the stone, in principle, the same divisions as the stone can be used, such as the Yin and Yang angle division, the window division, and the building edge division.
-
Nippon obtained the first batch of China's green product certification to promote green and low-carbon recycling
Time of Update: 2021-03-22
They are advancing the design, construction and production of factories in strict accordance with national environmental protection standards, and are committed to achieving The five goals are intensive land use, harmless raw materials, clean production, waste recycling, and low-carbon energy.
-
How does the family remove the glue on the tiles
Time of Update: 2021-03-22
So, how to remove this glue stain?Here are some methods I summarized:1.
6. If possible, soak it in water first, then apply a little detergent, and then use an old toothbrush to see the effect.
-
Allnex accelerates the construction of a world-class high-performance environmentally friendly resin production base
Time of Update: 2021-03-22
, and at the same time comprehensively accelerated the construction of a world-class environmentally friendly high-performance resin production base , To promote green innovation to meet the growing demand for high-quality coating resins and additives in the Chinese and global markets.
-
"Waterproof putty" and "water resistant putty", have you distinguished...
Time of Update: 2021-03-22
The formula of "water-resistant putty" is completely different from ordinary putty.
5 MPa or more, which is twice that of ordinary putty; after 48 hours of soaking in water, The drawing strength of water-resistant putty is still higher than 0.
"Water-resistant putty" does not block the entry and exit of water vapor.
-
Mahogany furniture is lacquered after all?
Time of Update: 2021-03-22
For example, in the southern region, in order to prevent moisture, a thin layer of raw lacquer is applied to the surface of many furniture, which greatly prolongs the life of mahogany furniture.
-
The pollution prevention and control method of VOC in paint is discussed!
Time of Update: 2021-03-22
Prevention and Control Measures of VOC in Coating ProductionIn the process of paint production, it has many adverse effects on the natural environment and human body.
In the prevention and control of VOC pollution, it is necessary to strengthen on-site management and strengthen processes.
-
Brief analysis of adhesive types and main physical and chemical performance indexes
Time of Update: 2021-03-22
Because the esterified starch is partially cross-linked, The viscosity is increased, the storage stability is better, the moisture-proof and anti-toxic properties are improved, and the glue layer can withstand high and low and alternate effects.
-
Nouryon achieves profit growth in 2020 and continues to focus on customer cooperation and operational excellence
Time of Update: 2021-03-22
"Nouryon will continue to promote strategic capital investment, operational excellence, and innovative solutions in China to support the sustainable development of China's chemical industry.
-
Analysis of performance appraisal index of anti-skid coating for flight deck
Time of Update: 2021-03-22
Considering through the analysis of domestic and foreign flight deck anti-skid coating related standards and the problems found in actual use, the performance appraisal index that meets the actual use characteristics of my country's aircraft carriers is proposed to provide reference for the subsequent formulation of military standards.
-
Is the ink always scratched during the printing process?
Time of Update: 2021-03-22
. The solvent itself volatilizes very slowly, causing the free part of the ink on the plate roller to not be dried on the surface of the plate roller in time, and its state is similar to that of the ink with dots, so when the printing substrate passes the plate roller, the free part of the ink on the plate roller is easy The ground is transferred to the printing substrate, resulting in unclean scratches.
-
The use of a phosphate nanofile and scratch-resistant water-resistant coating
Time of Update: 2021-03-22
The surface of the stainless steel plate is uniformly coated with the polyvinyl alcohol/water-based polyurethane mixed paint modified by the micron-sized diameter zirconium phosphate nanosheets by spraying, and dried in an oven at 65° C.
-
What are the tricks in the home improvement waterproof coating market?
Time of Update: 2021-03-22
Of course, the boss there will explain that the high-priced waterproof materials are national standard products and are generally purchased and used by the owners themselves, while the cheap materials of 4 to 5 yuan/kg are generally used by small home improvement companies and home improvement guerrillas.
-
How to heat the floor of the freezer?
Time of Update: 2021-03-22
If the floor of the cold storage is not maintained in a low temperature environment for a long time, it will cause frostbite and cause various ground problems.
The problems on the floor of the cold storage are mainly caused by low temperature and forklift rolling.
-
Study on Preparation and Performance of Graphene Waterborne Anticorrosive Coatings
Time of Update: 2021-03-22
(2) Preparation of anti-corrosion coatingMix the curing agent component and the epoxy component according to a specific mass ratio, dilute with water and stir evenly, make a sample according to HG/T 5573-2019 "Graphene Zinc Powder Coating", and conduct subsequent coating performance tests.
-
How to improve the waterproof, anti-sticking and abrasion resistance of wood paint?
Time of Update: 2021-03-22
Common problems are as follows:Poor paint film adhesionAfter the general water-based wood paint is applied, it will be found that the bonding between the coating layers is not strong, resulting in poor com" href="http://">adhesion .
-
Quickly understand the 5 types of UV light curing adhesives
Time of Update: 2021-03-22
The liquid glue used in the earlier touch screens is thermally cured, which has a long production process and low efficiency.
-
The whole house is moisture-proof | Home decoration should be "tide" not damp
Time of Update: 2021-03-21
5mm Yuhong 200 gold standard flexible waterproof coatingSolution advantages:■Make full use of the different characteristics of the wall and the ground for material matching design■Polyurethane waterproof coating is the most comprehensive waterproof coating with excellent corrosion resistance and durability.
-
If the real stone paint comes off in a large area, is there a problem with the real stone paint?
Time of Update: 2021-03-21
If the exterior wall is constructed with real stone paint, after leveling it with mortar, hang a layer of mesh cloth, then level it with mortar again, and then paint the primer, the service life will be greatly increased.
