-
How to distinguish the use of ink by ink viscosity
Time of Update: 2022-04-19
Due to the high cohesion and strong adhesion of the "viscous" ink with high viscosity, it is not suitable for use in some cases, such as: printing offset paper, whiteboard paper and other papers with low paper strength, the printing speed is fast, and the ambient temperature is high.
-
What are the advantages and effects of commonly used coating products for building exterior walls?
Time of Update: 2022-04-18
01 Industry development trends and brands commonly used in the market development trend Exterior wall coatings are basically divided into ordinary non-elastic latex paints, elastic coatings (flat coating, brushed, embossed), textured coatings, real stone paints, colorful coatings, water-based/oily fluorocarbon metallic paints (currently used less), and some Special processes, such as fair-faced concrete effects, such as finished imitation sandstone effects, imitation limestone, pottery stone .
-
Construction of Liquid Epoxy Coating Inside Subsea Pipeline Nodes
Time of Update: 2022-04-18
Figure 5 Root pass inspection equipment The battery of the internal anti-corrosion trolley needs to be replaced or charged regularly, and sandblasting abrasives and liquid epoxy materials also need to be added in time according to the consumption .
-
What are the precautions for using imitation stone paint on exterior walls in spring?
Time of Update: 2022-04-18
At present, the spraying methods of more rough stone-like paint (sand-in-water) on the market are as follows: the first intermediate coat is constructed by adjusting the atmospheric pressure to form the basic color, and the second intermediate coat is constructed by reducing the air pressure, granulating, and spraying .
-
Curing, adhesion, scratch resistance and other UV inks that need the most attention and solutions
Time of Update: 2022-04-18
As a more environmentally friendly ink, ink has the characteristics of fast curing speed, no volatile organic solvent, strong film-forming hardness, and good solvent resistance. and other fields have
-
No more undulations - leveling control for waterborne coatings
Time of Update: 2022-04-18
Finally, Modarez PW 677 is also a leveling agent that significantly enhances the surface appearance of coatings and provides high substrate wetting properties .
-
Acrylic defoamer to eliminate air bubbles in industrial water-based coatings and inks
Time of Update: 2022-04-18
For water-based paint ink foam problems, you can add acrylic defoamer to eliminate foam paint online coatingol.
For the foam in the water-based paint and ink, acrylic defoamer can be added for defoaming treatment .
-
The role of water-based ink in corrugated box printing
Time of Update: 2022-04-18
Control the viscosity of the machine before and after the color sequence and the drying time of the ink layer to ensure that the ink color printed in the latter color can cover the previous color .
-
Anning Co., Ltd. established a new wholly-owned subsidiary
Time of Update: 2022-04-18
On February 24, 2022, Panzhihua Anning Titanium Material Technology Co.
was established.
-
Protecting boat and ocean health requires careful balance of antifouling coatings
Time of Update: 2022-04-18
The study found that although the coverage of hard fouling on the flat underwater hull surfaces of ships varies, at least 95% of the global commercial fleet is heavily polluted in niche areas .
-
Construction Factors Affecting Gloss of High Gloss Polyester Powder Coating Films
Time of Update: 2022-04-18
Enter the collected data into the Minitab table, and use Minitab to analyze the main effect diagram of the depth of the workpiece surface pit and the surface gloss of the coating as shown in Figure 1 .
-
Causes and Prevention of Floating Color and Flowering of Printing Ink Film
Time of Update: 2022-04-18
Secondly, we know from the observation of the whole process of packaging and printing ink settling: the effect of particle size is greater than that of density, and the floating color is more serious, which is usually caused by the density difference of the pigment.
-
2022 China Industrial Expo ~ New Materials Exhibition July
Time of Update: 2022-04-18
China International Industry Fair New Materials Industry Exhibition will make full use of the platform advantages of China International Industry Fair in the field of advanced equipment manufacturing, integrating petrochemical, robotics, information technology, new energy, automobiles, aerospace, rail transit, shipbuilding, national defense and military industries.
-
Novel β-SiC nanoparticle-based anode material can be used in lithium-ion batteries
Time of Update: 2022-04-18
Inspired by sphalerite, a research team from Japan's Advanced Institute of Science and Technology proposed a rational design for the preparation of β-SiC-based anode materials at lower temperatures.
-
Research on high-weather-resistant textured powder coating and its application on SUV bumper
Time of Update: 2022-04-18
2. 5 Influence of different manufacturers' curing agents on the texture In the hydroxyl-terminated polyester/TMMGU curing system, when a certain temperature is reached, the amine-blocked sulfonic acid is deblocked, and the curing agent TMMGU and the hydroxyl-terminated polyester have a complex cross-linking curing reaction under the synergistic effect of multifunctional functional group assistants.
-
What is the progress of the research on waterborne polyurethane modification?
Time of Update: 2022-04-18
The low solid content of WPU emulsion leads to its slow drying speed; in addition, WPU products have poor water resistance and heat resistance, and low bonding strength, so they need to be modified to improve their comprehensive properties .
-
Longbai Group: The company's sales price of titanium dioxide in the first quarter of this year increased by about 4,500 yuan / ton compared with the same period last year
Time of Update: 2022-04-18
An investor asked Longbai Group (002601) how much has the price of your company's titanium dioxide increased in the first quarter of this year compared with the first quarter of 2021?
-
The "professional show" of the coating raw material industry: the 2022 International Coatings Raw Material Selection Conference is a heavy preview!
Time of Update: 2022-04-18
The conference aims to integrate relevant organizations, enterprises, media and other forces in the paint industry, and build a professional platform for paint raw material and equipment suppliers to efficiently display their corporate image, so as to effectively enhance the brand value of the enterprise and create business opportunities for the enterprise .
-
Introduction of common spraying methods for water-based coatings - air spraying!
Time of Update: 2022-04-18
Figure 1 Gravity Air Spray Gun Figure 1 is a gravity air spray gun, the paint tank is located on the upper part of the spray gun, the paint is sprayed from the paint nozzle by its own gravity and the negative pressure formed by the front end of the paint nozzle, and mixed with air for atomization .
-
Preparation and Research of Fiber Coatings with Self-cleaning and Self-healing Properties
Time of Update: 2022-04-18
Fig. 1 Preparation method of coating for self-cleaning and self-healing fibers As can be seen from Figure 1, firstly, a silane-modified prepolymer with a furan group at the end was synthesized by combining APDS and FGE .
