-
1.5 tons of JUNG universal handling small tank for machine tool handling and 5 years warranty
Time of Update: 2021-07-27
5 Set (load 15 tons) JKB10Set ( load 20 tons), JKB14Set ( Load 28 tons) For detailed product parameters and video references, please visit: http:// class="MsoNormal"> JKB Universal carry a small tank may be used for power distribution equipment, machine tools, presses, transfer shelter conveyance, containers, electrical equipment, generators, turbines handling, shield machine, electric pot, cement plants, shipyards, machine tools and the like .
-
Design structure of soil-supported floor (Ⅱ)
Time of Update: 2021-07-27
The bearing capacity per unit area, q, is obtained by the following formula:If the acting position of the uniform load is clear, Hetenyi[49] gives the equation of the positive bending moment caused by the uniform load with the acting width of 2c (as shown in Figure 7.
-
Nearly a thousand chemical companies were investigated!
Time of Update: 2021-07-27
▶Shanxi: From July 1, 2021, production, sales and use will be banned in the whole province ▶ Shanghai: The city will ban the use of non-degradable disposable plastic straws from January 1, 2021, and the Municipal Supervision Bureau will shut down manufacturers and distributors along the way .
-
Strictly control the "two highs" chemical enterprises should take advantage of the trend
Time of Update: 2021-07-27
Through partial adjustments of planning and re-allocation of resource elements, the development of new chemical technologies and new products will be accelerated, to seize the " commanding heights " of transformation and upgrading under industrial policy changes , and expand industrial competition.
-
Western Superconductor plans to raise 2 billion yuan to invest in multiple projects
Time of Update: 2021-07-27
And fast forging machines and other equipment, aiming to comprehensively increase production capacity, adapt to the rapid development of the industry, and build the company into an internationally advanced and domestic first-class high-performance titanium alloy large-scale production and testing evaluation base .
-
Thermally conductive adhesive suitable for hybrid vehicle batteries
Time of Update: 2021-07-27
This new adhesive is particularly suitable for low-voltage battery coatings in mild hybrid systems.
The product completes the structural bonding in one process and at the same time completes the connection with the thermal management system .
-
Claw 3 tons GT series claw jack is used for lifting tools in low and low occasions, imported from Japan
Time of Update: 2021-07-27
Eagle EAGLE Claw Jack- Longhai Lifting : [Brand name] EAGLE JACK brand [Product name ] claw jack, toe jack [Manufacturer] Konno Manufacturing Co. , Ltd. , Japan [In stock and quality guarantee] Part
-
Hundreds of delegation standard application demonstration projects started to declare
Time of Update: 2021-07-27
"Notice" clear declaration of the range of social groups with legal personality and industry standards organizations officially released information in the field of implementation, to declare the project should be implemented at least 6 months ( as of 2021 Nian 8 months 31 Ri ) , and the high technical level , The application effect is better .
-
Where is the main direction of new chemical materials?
Time of Update: 2021-07-27
Experts at the meeting said that under the complex domestic and international development situation, to achieve high-quality development in China's new chemical materials industry, it is necessary to break through the bottleneck, make up for shortcomings, and make positive progress in the high-end and differentiation of the industry .
-
34 billion!
Time of Update: 2021-07-27
As part of the transaction announced on July 6, 2021, BASF and Ceduri Corporation will completely withdraw their investment in Solenis .
The transaction does not affect any existing medium and long-term supply agreements and commercial relationships between BASF and Solenis .
-
This chemical company in Wuxi was ordered to stop immediately!
Time of Update: 2021-07-27
In response to this, Wuxi Municipal Bureau of Ecology and Environment will, in accordance with the provisions of Article 83, Item 2 of the Water Pollution Prevention and Control Law of the People’s Republic of China, order Honghui New Materials to immediately stop the illegal discharge of pollutants, and will impose a fine of RMB two.
-
Baoti Co., Ltd. is expected to increase its net profit by 94.16% in the first half of 2021, with a net profit of 276 million.
Time of Update: 2021-07-27
(600456) released the 2021 semi-annual performance forecast: It is estimated that the net profit attributable to shareholders of listed companies will be about 276 million yuan in the first half of 2021, a year-on-year increase of about 94.
-
The first special inspection and supervision work in 2021 is fully completed
Time of Update: 2021-07-27
It is understood that in order to effectively prevent and resolve the major safety risks of hazardous chemicals, the Emergency Management Department deployed and carried out the first special inspection and supervision work of enterprises with major sources of hazardous chemicals in 2021 in early May .
-
The "14th Five-Year" Development Plan for the Raw Material Industry will be released soon
Time of Update: 2021-07-27
Global Coatings Network News: On July 16 , Huang Libin, spokesperson for the Ministry of Industry and Information Technology and Director of the Operation Monitoring and Coordination Bureau, stated at a press conference that the Ministry of Industry and Information Technology will soon release the " 14th Five-Year Plan for Industrial Green Development" and the " 14th Five-Year " Raw Materials "Industrial Development Plan", in terms of industrial structure, energy consumption, production process, resource utilization, product supply, etc.
-
An article to understand the technology and characteristics of silica functional materials prepared from industrial solid waste
Time of Update: 2021-07-27
Alkali melting (dissolving) method uses solid waste and alkali to react in molten or aqueous solution to prepare water glass, and then pass CO2 or react with hydrochloric acid or sulfuric acid solution to precipitate silica in flocculent form, filtered and washed , After drying, a white carbon black product is obtained .
-
The Market Supervision Bureau of Linxia Prefecture, Gansu Province: 40 batches of qualified building materials and 2 batches of building materials were unqualified in random inspection
Time of Update: 2021-07-27
This supervision and random inspection involves four building materials products, including cement, construction steel, autoclaved aerated concrete blocks, metal surface sandwich color steel plates, as well as paints, synthetic resin emulsion interior wall coatings, and exterior wall coatings for construction in the production and sales links.
-
Research progress of water-based auto parts coatings
Time of Update: 2021-07-27
There are many types of auto parts, and many upstream industries are involved, mainly including steel, aluminum, plastics, coatings, rubber, electronic components, machinery, textiles, glass, ceramics, leather, non-ferrous metals, etc.
Among them, water-based coatings for metal auto parts have developed rapidly, while plastic parts (such as bumpers, etc.
-
FBE Mending Technology in the Process Pipeline of Offshore Oil Platform
Time of Update: 2021-07-27
introductionFusion bond epoxy powder coating (Fusion bond epoxy coating, referred to as FBE) is a thermosetting heavy-duty anti-corrosion epoxy powder coating that uses air as a carrier to transport a
-
Nouryon expands Expancel expandable microsphere production capacity in China
Time of Update: 2021-07-27
The production facilities and larger production capacity of Nouryon's Ningbo base will help us meet the needs of the local market," Nouryon Specialty Polymers Vice President Sylvia Winkel Pettersson said, “We expect that this relocation will be seamless and ensure that Nouryon can better serve Chinese customers with high-quality products and services .
-
Preparation method and application of sand pattern powder coating
Time of Update: 2021-07-27
The advantage of the sand grain produced by this method is that its cost is lower, but if the amount of filler is not properly controlled, the construction performance of the powder coating, the mechanical properties of the coating film, and the chemical resistance will be affected .
