-
What to do if there is dust when using a small laboratory jet mill
Time of Update: 2022-09-09
After being filtered by the filter bag, the air is discharged, and the material and dust are collected to complete the crushing .
After being filtered by the filter bag, the air is discharged, and the material and dust are collected to complete the crushing .
-
Taber wear gauge test steps and maintenance procedures
Time of Update: 2022-09-09
Place the cut specimen on the test bench according to the standard requirements.
Place the cut specimen on the test bench according to the standard requirements.
Place the cut specimen on the test bench according to the standard requirements.
-
How to use the ultrasonic tumbler and matters needing attention
Time of Update: 2022-09-09
2. It is strictly forbidden to turn on the ultrasonic wave when the liquid is not filled with the interlayer tank, otherwise the machine will be damaged!
-
Prefilled Needle Syringe Leakage Positive Pressure Tester - Technical Literature
Time of Update: 2022-09-09
9MPa (air source user-supplied) Working temperature 15℃-50℃ Relative humidity 80% higher, non-condensing power supply 220V 50Hz Product configuration standard Configuration: host, sealed barrel, micro printer, touch screen prefilled needle syringe leak positive pressure tester - technical literaturePrefilled Needle Syringe Leakage Positive Pressure Tester-Technical Literature It is specially used for leakage and patency measurement of various infusion sets, infusion tubes, catheters, anesthesia filters, medical needle tubes, etc.
-
SCIEX mass spectrometer QTRAP technology introduction
Time of Update: 2022-09-09
Which system is right for you to advance your analysis?QTRAP technology is a unique triple quadrupole system that not only provides all the performance of triple quadrupole, but also linear ion trap capability to overcome matrix interferences, improve screening throughput, and more .
-
Syringe Body Negative Pressure Tightness Tester-Technical Literature
Time of Update: 2022-09-09
7MPa Vacuum holding time 0-60min Host size 430mmX330mmX170mm (length, width and height) Weight 9Kg Working temperature 15℃-50℃ Relative humidity 80%, non-condensing Expose working power 220V 50Hz syringe body negative pressure tightness tester-Technical Literature
-
What are the characteristics of pure steam sterilizer?
Time of Update: 2022-09-09
CG series pure steam sterilizers are mainly used for moist heat sterilization operations of the following major categories of products in the biopharmaceutical industry: sterile clothing in the 100-level clean area; various aluminum barrels and rubber stoppers for antibiotic filling, freeze-dried powder Use vials and rubber stoppers; and other high-demand occasions .
-
Do you know how to use the portable pesticide residue rapid detector?
Time of Update: 2022-09-09
How to use DDB Portable Pesticide Residue Rapid Detector: 1: Prepare the sample solution according to the steps of the reagent instructions 2 Put the sample solution cuvette into the corresponding channel, click the sample name button to select [Sample Name], click Test.
-
How to solve the problem of tightness and looseness during the capping process of the automatic capping machine
Time of Update: 2022-09-09
Automatic capping machine is widely used in capping, capping (or capping, capping) of various types of bottle caps, plastic caps such as screw caps, child-proof caps, spray heads, rubber stoppers, etc.
-
Reproductive puncture and egg retrieval needle rigidity tester CSI-Z045 Shanghai Chengsi related parameters and quotations
Time of Update: 2022-09-09
Programmable controller: PLC/ARM Touch screen: 7-inch color touch screen Wei Luntong Sensor: high-precision force sensorReproductive puncture needle rigidity tester Test standard: GB/T18457-2015 Stainless steel needle tube for manufacturing medical devices ISO9626-2016 Requirements and test methods for stainless steel needle tube for medical device manufacturing Technical parameters: Operation interface: Simplified Chinese/English Tube wall: normal wall , thin wall, ultra-thin wall, ultra-thin wall four optional; Nominal specification: 0.
-
Precautions for the use of stainless steel autoclave
Time of Update: 2022-09-09
When there is pressure in the kettle, it is strictly forbidden to twist the nut or knock the autoclave; 6.
When there is pressure in the kettle, it is strictly forbidden to twist the nut or knock the autoclave; 6.
-
A brief introduction to the vacuum centrifuge concentrator and its technical principles
Time of Update: 2022-09-09
The simple composition of the vacuum centrifuge concentrator generally includes three parts: centrifuge, connecting pipeline and vacuum pump, and the complete system includes: cold trap, flask, chemical trap and absorption column, vacuum control valve, vacuum manometer, trolley, etc.
-
Shaw dew point meter set off towards the dream
Time of Update: 2022-09-09
Features: Certified to ATEX, IECEx and UL standards for hazardous areas Automatic calibration (AutoCal) High-speed measurement of dry components User selectable units: °C, °F, ppm(v), ppm(w) , g/m3, lbs/MMscf Accuracy: ±2°C Different measurement range: -100°C - +20°C Dew point Full color large screen display, 10 languages displayed twice Charging/connecting to PC interface Bluetooth connection/printing Strong and durable, can be used in the toughest environment Voltage; rechargeable lithium battery Light weight: <1.
-
Agricultural Microclimate Automatic Weather Station-A Field Microclimate Monitoring Equipment@2022Updated
Time of Update: 2022-09-09
Three-meter carbon steel bracket, two screw threads Material protective box, anti-corrosion, anti-oxidation, waterproof grade IP66 Agricultural Microclimate Automatic Weather Station - a field microclimate monitoring device @2022Updated Automatische Mikroklima-Wetterstation für die LandwirtschaftFT-NQ14 can provide farmers with real-time weather conditions every day, and can carry out short-term reports on weather such as drought, low temperature, flood and frost, Help farmers take precautions in advance .
-
What are the key points for the selection of purified water equipment systems?
Time of Update: 2022-09-09
When purchasing purified water equipment, customers should understand the main components in advance.
When purchasing purified water equipment, customers should understand the main components in advance.
When purchasing purified water equipment, customers should understand the main components in advance.
-
Here are some things to pay attention to when using a reciprocating medicine cutter
Time of Update: 2022-09-09
The reciprocating medicine cutting machine adopts an adjustable intermittent feeding mechanism, which can cut slices or segments with any thickness of 1-15mm, simplifying the speed change mechanism a
-
Integrated Negative Oxygen Ion Sensor - An Atmospheric Environment Sensor #2022 Updated
Time of Update: 2022-09-09
5, pm10, temperature, humidity , air pressure, oxygen content, noise, wind speed, wind direction and other meteorological elements are realized through a highly integrated structure, which can realize 24-hour continuous online monitoring of outdoor meteorological parameters, and output ten parameters to the user at one time through the digital communication interface .
-
Break through the giant blockade! The scarce and top domestic high-end instrument leader has greater potential than Lianying
Time of Update: 2022-09-09
As a leading domestic medical imaging company, Lianying Medical has landed on the science and technology innovation board market and has been affirmed by the capital market, with a total market value of more than 150 billion yuan, while the IPO of BGI Intelligent Manufacturing Science and Technology Innovation Board, as the leader of gene sequencers, was registered in July this year and approved by the CSRC and will be listed on August 31.
-
Nasal Oxygen Tube Comprehensive Tester-Technical Literature
Time of Update: 2022-09-09
9 Map (air source user-supplied) Air source interface: Φ8 mm polyurethane tube Power supply: AC 220V 50Hz Nasal Oxygen Tube Comprehensive Tester-Technical Literature
-
Master the characteristic maintenance method of high and low temperature impact test chamber
Time of Update: 2022-09-09
For small equipment, the vertical lifting method is used to save one box, which can save costs; but for medium and large high and low temperature impact test chambers, as long as the plan is reasonable and feasible, it can be To ensure that the standard index requirements are met, it is a better choice to use a horizontal two-box test plan .
