-
Low-VOC water-based metal pigment anti-settling and orientation aid: modified ethylene-vinyl acetate copolymer emulsion
Time of Update: 2020-11-01
Lu Yuyan, Xu Jingtian, Li Yuxuan, Carlos Feito, Yang Lijun/Haimings Water-based coatings have different viscosity requirements at different stages of application Shear viscosity, production of the req
-
Selection and precautions of water-based coating additives
Time of Update: 2020-11-01
3: Baking temperature Paint at room temperature into the high temperature baking, starting instant viscosity will drop, bubbles can be moved to the surface, however, due to the volatile solvent, coating curing, surface viscosity increase, will make the bubble film more stable, stay on the surface will produce shrink holes and pinholes, so baking temperature, curing speed, solvent volatilization rate on the effect of decolorizer also has an impact.
-
More flowering! Why BASF, the German chemical giant, "plus code" layout of the Chinese market
Time of Update: 2020-10-31
In 2016, BASF invested an further 90 million euros in the construction of the Shanghai Innovation Park Phase II project, moving the global headquarters for advanced materials and systems research to Shanghai.
-
Why BASF, the chemical giant, is "plus-size" the Chinese market
Time of Update: 2020-10-31
In 2016, BASF invested an further 90 million euros in the construction of the Shanghai Innovation Park Phase II project, moving the global headquarters for advanced materials and systems research to Shanghai.
-
A unified model for drying glassy polymer coatings
Time of Update: 2020-10-31
design and optimize industrial processes In addition, at the end of the drying experiment, the sol-gel transition is thought to explain the high solvent concentration away from the gas-liquid interface (dry surface).
This work can be implemented to design and optimize industrial processes.
-
Application Technology of Film Forming Aids in Architectural Coatings
Time of Update: 2020-10-31
In the role of coating film additives in water-based coatings film additives are important components of building coating products, which can improve the production process, improve product performance, improve paint construction performance, reduce environmental pollution, the development of new paint special functions.
-
Design of salt-sensitive and regenerated antibacterial polymer brush
Time of Update: 2020-10-31
-functional antibacterial surface is a promising design strategy comparative studies have also shown that removing any ingredients from polyDVBAPS/poly (HEAA-g-TCS) and poly (DVBAPS-b-HEAA-g-TCS) can impair overall antimicrobial performance and further support the synergy of these three compatible ingredients.
-
BASF is actively expanding its e-commerce business in China to drive a digital business model.
Time of Update: 2020-10-30
BASF continues to launch more high-quality products in its online flagship stores BASF is working with the 1688 Industrial Brand Platform to develop a new business model BASF has signed a strategic cooperation agreement with the 1688 Industrial Brand Platform BASF today announced the launch of 10 new products at its official flagship store 1688, an important B2B e-commerce service platform for Alibaba.
-
Arkema launches new acrylic acid reactor in the U.S.
Time of Update: 2020-10-30
Acoma has scheduled production of a new acrylic reactor with an annual output of 90,000 tons at its clear Lake, Texas plant.
The investment in the new acrylic reactor at the Clear Lake site is approximately EUR 80,700,000 .
-
BASF has introduced a new silicone moisturizer with excellent de-foaming properties.
Time of Update: 2020-10-30
Silicone moisturizers offer excellent de-foaming properties for a wide range of water-based coating formulations BASF recently introduced a new silicone moisturizer: Hydropalat ® WE 3225, which combines excellent substrate wetting and excellent de-foaming performance.
-
An article to understand the research status, application and future directions of moisture-curing PUR hot melt adhesives
Time of Update: 2020-10-30
Looking ahead to in the future, China's wet-cured PUR hot melt research still needs to work in the following areas: reducing melting temperature, improving initial viscosity, and improving adhesive properties in a variety of applications such as flexibility, heat resistance, flame retardant resistance, hydrolysate resistance and so on.
-
BASF Group's third quarter earnings before interest and tax, net of special items, fell 24% from a year earlier, confirming its full-year 2019 outlook.
Time of Update: 2020-10-30
sliding through third-quarter sales across its business areas: earnings before interest and tax on , net of special items, were EUR 1.1 billion, down 24% from the same period last year, mainly due to a significant decrease in earnings in the materials and chemicals business.
-
The influence of aluminum hydroxide on intumescent coatings
Time of Update: 2020-10-30
a variety of combustible materials the latter into the composition of flame retardant coatings also helps to reduce the carbon formation temperature.
Fireproof coatings can be used to protect a wide range of combustible materials such as wood, laminates, plastics, etc.
-
Bio-based reactive diluent derived from cardanol
Time of Update: 2020-10-29
The results showed that the viscosity and volume shrinkage of the UV-cured PUA system decreased significantly after the cashew phenol monomer was added, while maintaining a high bio-renewable content .
-
BASF's alkyl glycoside production capacity in Jinshan, Shanghai, is expected to double.
Time of Update: 2020-10-29
Increased capacity helps BASF provide quality products in a timely and stable manner to better serve its customers further support customers in the use of mild surfactant formulations based on natural, renewable raw materials in home and personal care products as part of BASF's capacity optimization project announced in 2018, BASF expanded its Alkyl Glycoside (APG) production facility at its Jinshan production site in Shanghai, adding 10,000 tons of capacity.
-
BASF plastic additives help improve the production process and function of underwater cable sheaths.
Time of Update: 2020-10-29
high-energy electronic crosslinking process helps to improve the thermal, chemical, barrier, impact and other mechanical properties of plastic products to meet the application needs of customers in the wire and cable industry.
-
Clariant puts sustainability solutions at the fingertips of the coatings industry at CHINACOAT 2019.
Time of Update: 2020-10-29
A full range of high-performance additives and pigments makes the coatings industry more sustainable safe, easy-to-use, sustainable solutions for indoor and outdoor applications in homes and building
-
Development and Performance Research of Low VOC, Low Odor Waterborne Wood Coatings
Time of Update: 2020-10-29
Choose the film temperature low polyurethane dispersion and acrylic emulsion C to mix, on the one hand, can adjust the membrane system MFFT, reduce the amount of membrane additives, reduce the content of formula VOC, on the other hand, can use the advantages of complementary, improve the comprehensive performance of wood coating.
-
A new type of water-based paint anticorrosive fungicide that meets the national new green standard
Time of Update: 2020-10-28
Among them cost-effective high temperature MBS, BNT2, LBS, BZP , are free of CIT/MIT, formaldehyde, formaldehyde release body, can release formaldehyde Bropol, and are VOC-free water-based products, environmentally friendly .
-
20% increase in sales! The password for the rapid development of Huateng Spring!
Time of Update: 2020-10-28
HuaTenYuChun person in charge said, Huateng Yuchun is gradually integrating the Ganzhou region acrylic, acrylic, water-based environmental protection emulsion and adhesive and other industrial chains, adhere to the "one-core two-wing dual drive" as the strategic guidance, to science and technology research and development as the core, Beihua Group and Yanchun Group two major strength enterprises escort, to the Ludong Development Zone and Bohai New Area two production bases as a driving force to start innovation and development, cross-development.
