Worm wheel crusher

Our main business: worm crusher, coarse crusher, swing granulator, cone mixer, pulverizer and other products This machine is mainly used in medicine, chemical industry, food, pesticide, building materials and plastic industries Its Mohs hardness is less than 3 It can crush soft, brittle and fibrous materials Such as medicine, dyestuff, pigment, food additive and plastic additive, etc Working principle the main technical feature of the machine is that it can quickly discharge the product out of the machine cavity by using the dynamic pressure generated by the pulverizer according to the potential The secondary air inlet (optional) can be set to form an air cushion in the inner cavity of the shell to reduce the air resistance of discharging At the same time, it can also be connected with the tail gas pipe of the recovery system and can be connected with an automatic or pulse type box type dust remover Its main function is to avoid dust flying and reduce the loss of materials, to recycle and reuse, and to reduce environmental pollution, which conforms to GMP standard The working principle of this machine is mainly to crush the material between the tooth plate and the movement, and at the same time, it also uses the vortex air flow generated by the back of the knife to strengthen the crushing of the material If the thermal sensitivity of the material is low, it can be equipped with a cold air circulating cooling device (the temperature can be controlled at 20-30 ℃) or a cryogenic device (the temperature can be controlled between -4510 ℃) Technical parameters model 20 30 40 60 production capacity (kg / h) 20-120 30-180 40-250 50-450 main shaft speed (mm) 45004000 3500 2800 rotor diameter (mm) 200 300 400 600 main engine power (kw) 4 7.5 11 22 finished product fineness (mesh) 20-120 20-120 20-120 20-120 20-120 20-120 grain size (mm) 1-5 1-5 1-5 1-5 1-5 main engine weight (kg) (excluding motor weight) 280 330 420 580