Why does the top cover of the electroplating filter leak water?

Why does the upper cover of the electroplating filter leak? The electroplating filter fails during use.
This situation is inevitable.
How to solve the fault is what we need to consider
.

In the daily use of electroplating filters, many customers should encounter such a problem: the upper cover leaks
.

So today, getting smaller and smaller will take you to understand the reasons for the leakage of the upper cover of the electroplating filter
.

When the upper cover of the electroplating filter leaks, it may be caused by the following reasons: 1.
The gasket on the upper cover of the equipment is aged after long-term use and loses elasticity, resulting in sealing failure
.

It is recommended to replace the upper cover sealing ring with a new one in time
.

2.
The electroplating filter cartridge is deformed
.

If there is a slight leak, we need to recalibrate the cap
.

If the leak is serious, we need to replace the filter cartridge
.

3.
The handle of the upper cover of the electroplating filter is not tightened, resulting in excessive pressure.
It is recommended to lock the handle and clean or replace the filter element regularly
.

     In the above content, we have increasingly introduced three reasons for the leakage of the upper cover of the electroplating filter, and the corresponding treatment methods are also very simple
.

In fact, with standardized use and regular inspection, such failures can be avoided
.

For more details, stay tuned to the growing pump industry!