What work does the rocking granule machine need to do before and after operation?

The rocking granule machine will be wet powder or block dry material developed into the required particles, mainly the wet powder mixture, under the positive and negative rotation of the rotating drum, mandatory through the screen to make granules of special equipment
.

At present, the swing granule machine is mainly suitable for pharmaceutical, chemical, food and other industries to manufacture various specifications of particles, dried into a variety of molded products, the machine can also be used to crush and condense into a lump of dry material, all material contact is made
of stainless steel.

Operating procedures of rocking granulator: 1, preparation before starting: (1) Check whether the surrounding of the rocking pellet machine is clean, and no materials are allowed to hinder the operation; (2) Check whether the lubricating oil and oil in the rotating part of the machine and the turbine box are above the oil surface line; (3) Check whether the screen is intact and whether the drum is clean
.

2, boot operation: (1) press the start button to start the machine, check the operation of the granule machine, if there is no abnormal situation, shut down, will undertake the container or plastic bag to connect; (2) Reasonably select the speed
according to the viscosity and dry humidity of the material.

Pour the material into the bucket and pour an appropriate amount
.

3.
Work after the operation: After the operation is completed, turn off the power supply and clean the peripheral hygiene
of the machine and equipment.

4.
Precautions: (1) The material should be added gradually, and it is strictly forbidden to fill it up at one time to avoid the screen being damaged by too much pressure; (2) If the material is stuck in the roller, it must be stopped, shoveled out with bamboo chips or other tools, and it is strictly forbidden to extend the hand into the roller; (3) Check whether the oil surface is above the oil surface line before each use, and replace the new oil once every three months; (4) When the machine is moving, it is strictly forbidden to extend the hand or any part of the body into the hopper; (5) If there is an abnormal sound when the machine is running, it must be stopped for maintenance
.