Vial filling capping machine operation steps

Shanghai Shenggang Cillin bottle filling capping machine operation steps are as follows: First, the adjustment of the upper arm when the vial filling capping machine rolls bottles of different specifications The Xilin bottle filling capping machine can be used to roll 10-500ml bottle caps, when using any of the specifications of the bottle, as long as the bottle of this specification is placed on the tray, one hand supports the crossarm, the other hand loosens the nut on the left side of the crossarm, so that the crossarm falls or rises, until the cap head and the cap are about 20 mm position, the nut is tightened, Then use a random strap of hex wrench to lock the ring close to the crossarm
.

When tightening, pay attention to the position of the rolled cap and the cap
.

Second, the adjustment of the cillin bottle filling capping machine support: put the bottle into the lower branch, loosen the two screws on the support, move the bottle and the next one together until the cap head and the cap position are corrected, and then tighten
the two screws.

Third, the specific operation method of the vial filling and capping machine: 1, the bottle filled with liquid and the lid is placed on the lower tray, leaning on the V-shaped support, holding the bottle with one hand, and the other hand pulling the handle backwards and down, then the tray supports the bottle upwards until the cap and the rolling cap head are pressed
.

2.
When the cap and the cap head are pressed, the three rolling cap tips that are constantly rotating rotate several times before the cap is rolled tightly
.

3.
Push the handle forward, so that the lid of the rolled lid returns to its original position with the tray, the entire operation process is completed, and then the above operation can be repeated when each bottle cap is
rolled.

Fourth, the adjustment of the capping head of the vial filling and capping mill: The vial filling capping machine is equipped with a plurality of capping heads, and the upper capping head
can be selected according to the size of different bottle caps.

Try it
out in a bottle before formal use.

1, the lid is not rolled tightly, you can unscrew the rolling cap lock nut according to the counterclockwise direction to rotate out the upper rolling cap, and then lock the upper fixed nut
.

2, the lid is rolled too tightly, there is a rotary cutting cap phenomenon
.

The upper cap lock nut can be screwed in a clockwise direction into the upper rolled cap and then the upper fixing nut
can be tightened.