Tianjin product quality inspection: Jifuzhi Dolit and other coatings are not qualified

It was reported that in 2014 49 products were monitored and tested. Among
, the passing rate
the interior wall coating was 94.74 percent, and the
pass rate of
external wall coating was 81.48 percent.
This sampling found that Tianjin Jifuzhi
Coatings
Co., Ltd., Tianjin Dolit Coatings Co., Ltd., Tianjin Ninghe County Feng Yongmao
Coatings Factory
, Tianjin Meibaili Paint Products Factory, Tianjin Cross-Shuangyan Coatings Manufacturing Co., Ltd. and other 5 enterprises produced 5 batches of outer wall coatings, and Tianjin Jiayi Coatings Factory (general partnership) production of a batch of internal wall coatings were found to be non-conforming.The
-to-ratio item is a test item for white and light paint, which refers to the ratio of reflectivity of the same paint film applied to the black and white substrates with specified reflectivity, reflecting the ability of white and light paint to eliminate color or color differences on the substrate, or indirectly reflecting the amount of paint used to cover the same area substrate. The project is not qualified,
will lead to
latex paint, poor cover effect, so that the paint lacks the proper protection and decorative functions. The main reason for the failure of the ratio item is that the quality control of raw materials is not strict enough, unqualified raw materials may lead to the ratio of non-conformity, and if the product formula is unreasonable, the ratio of raw materials is not reasonable, will also cause the project to be unqualified.