Three-slot thermal shock chamber which components need to be cleaned frequently

The three-slot cold and thermal shock test chamber is composed of a very large number of components, so each component is different, and the natural cleaning of
it is also different.

After the three-slot cold and thermal shock test chamber is used for a long time, the internal and external parts of the equipment will accumulate dirt, and these dirt needs to be cleaned regularly, the equipment in addition to the external need to remove dust, keep clean, the regular cleaning of the internal components of the equipment is more important
.

Therefore, the cleaning of the internal components of the equipment should be timely and accurate in place
.

The main components of the equipment are humidifiers, evaporators, circulation blades, condensers, etc.
, the following is mainly for everyone to introduce the cleaning methods
of the above components.

1.
Humidifier: The water inside is not cleaned regularly, then scale will be generated
.

The presence of these scales will cause the humidifier to form a dry burn when it is working, resulting in damage to the humidifier
.

Therefore, it is necessary to replace the clean water in time and clean the humidifier
regularly.

2.
Evaporator: The three-tank cold and thermal shock test chamber is under the action of strong wind, and the cleaning grade of the sample is not the same
.

Dust will then be generated, and these fine dusts will condense on the
evaporator.

It should be cleaned every
three months.

3.
Circulating wind blade: He and the evaporator are the same, over time, it will condense a lot of small dust, and the evaporator the same way to
clean.

4.
Condenser: Its interior needs to be decontaminated and dusted to ensure good ventilation and heat exchange performance and continuous heat exchange performance
.

Cleaning and maintenance is very important and cannot be delayed
.

The longer it drags on, the worse
it will be for the device.

Therefore, the cleaning of the parts of the three-slot cold and thermal shock test chamber cannot be sloppy
.