-
Categories
-
Pharmaceutical Intermediates
-
Active Pharmaceutical Ingredients
-
Food Additives
- Industrial Coatings
- Agrochemicals
- Dyes and Pigments
- Surfactant
- Flavors and Fragrances
- Chemical Reagents
- Catalyst and Auxiliary
- Natural Products
- Inorganic Chemistry
-
Organic Chemistry
-
Biochemical Engineering
- Analytical Chemistry
-
Cosmetic Ingredient
- Water Treatment Chemical
-
Pharmaceutical Intermediates
Promotion
ECHEMI Mall
Wholesale
Weekly Price
Exhibition
News
-
Trade Service
413 412，《（）》。，、、、、、（）、7。
，2020、、、5。452.
86%，2.
8。
86%，2.
8。
7，，，；；；，pharmnet.
com.
cn/news/yyzb/" target="_blank">。，。
com.
cn/news/yyzb/" target="_blank">。，。
，。，，；，，；，。
7：
，MRI、MRI。3。MRI；MRI：
1：MRI。
2：MRI≥10%。
3：MRI<10%。
（1）1（MRI）
：1，1，。≥25%。（，：①；②。。）
：1，1，。≥30%。
（2）2（ MRI ≥10%）
：1，1；。≥30%。
：1，1，。≥35%。
（3）3（ MRI <10%）
： 1 ， 3 ，。
Second round: Except for the one product with the lowest quotation in this group, the three products that ranked the bottom three in decline are eliminated, and the remaining products are planned to be selected.
Coronary dilatation balloon
The coronary dilatation balloons included in the centralized procurement scope this time are divided into two product types: rapid exchange pre-expansion balloon and quick exchange post-expansion balloon.
Divided into 2 groups according to product type:
Divided into 2 groups according to product type:
Coronary dilatation balloon group 1: quick-exchange pre-dilatation balloon products.
Coronary dilatation balloon 2 groups: rapid exchange type posterior dilatation balloon products.
Product to be selected
(1 ) 1 set of coronary dilatation balloon (quick exchange pre-dilatation balloon product)
The first round: Except for the two products with the lowest and second lowest quotations in this group, the five products that ranked the bottom five in decline are eliminated, and the remaining products enter the second round.
Products with a product decline of ≥80% will not be eliminated.
(In the case of the same product quotation, the order of retention shall be determined according to the following rules: ①The product with a large decline has priority; ②The province with a large purchase quantity has priority.
The same below.
)
Products with a product decline of ≥80% will not be eliminated.
(In the case of the same product quotation, the order of retention shall be determined according to the following rules: ①The product with a large decline has priority; ②The province with a large purchase quantity has priority.
The same below.
)
The second round: Except for the two products with the lowest and the second lowest quotation in this group, the five products that ranked the bottom five in decline are eliminated, and the remaining products are planned to be selected.
Products with a product decline of ≥85% will not be eliminated.
Products with a product decline of ≥85% will not be eliminated.
(2) 2 sets of coronary dilatation balloons (fast-exchange post-expansion balloon products) first round: Except for the 2 lowest and second lowest quotations in this group, the 3 products that ranked the bottom three in decline are eliminated.
The remaining products enter the second round.
Products with a product decline of ≥80% will not be eliminated.
The remaining products enter the second round.
Products with a product decline of ≥80% will not be eliminated.
The second round: Except for the two products with the lowest and the second lowest quotations in this group, the three products that ranked the bottom three in decline are eliminated, and the remaining products are planned to be selected.
Products with a product decline of ≥85% will not be eliminated.
Products with a product decline of ≥85% will not be eliminated.
Intraocular lens
The single-focus intraocular lens included in the scope of centralized procurement this time is divided into two product types: single-focus aspheric surface and single-focus spherical surface.
Divided into 2 groups according to product type:
Divided into 2 groups according to product type:
Intraocular lens group 1: single focus-aspherical products.
Two groups of intraocular lenses: single focus-spherical products.
Product to be selected
(1) 1 group of intraocular lens (single focus-aspherical product)
The first round: Except for the two products with the lowest and second lowest quotations in this group, the eight products that ranked the bottom eight in decline are eliminated, and the remaining products enter the second round.
Products with a product decline of ≥45% will not be eliminated.
(In the case of the same product quotation, the order of retention shall be determined according to the following rules: ①The product with a large decline has priority; ②The province with a large purchase quantity has priority.
The same below.
)
Products with a product decline of ≥45% will not be eliminated.
(In the case of the same product quotation, the order of retention shall be determined according to the following rules: ①The product with a large decline has priority; ②The province with a large purchase quantity has priority.
The same below.
)
The second round: Except for the 2 products with the lowest and the second lowest quotation in this group, the 7 products in the bottom seven of the bottom seven products are eliminated, and the remaining products are planned to be selected.
Products with a product decline of ≥50% will not be eliminated.
Products with a product decline of ≥50% will not be eliminated.
(2) 2 sets of intraocular lens (single focus-spherical product)
The first round: Except for the two products with the lowest and second lowest quotations in this group, the six products that ranked the bottom six in decline are eliminated, and the remaining products enter the second round.
Products with a product decline of ≥45% will not be eliminated.
Products with a product decline of ≥45% will not be eliminated.
The second round: Except for the 2 products with the lowest and the second lowest quotation in this group, 6 products in the bottom six rankings of product decline are eliminated, and the remaining products are planned to be selected.
Products with a product decline of ≥50% will not be eliminated.
Products with a product decline of ≥50% will not be eliminated.
Disposable cannula trocar
Disposable cannula trocars (excluding single-hole multi-channel trocars) are divided into 2 groups according to the company's total purchase quantity in the same type of products.
One set of disposable cannula puncture: The total purchase quantity of the same enterprise accounts for ≥10%.
Two sets of disposable cannula trocars: The total purchase quantity of the same enterprise accounts for less than 10%.
Enterprise proposed to be selected
(1) One set of disposable cannula puncture device (the total purchase quantity of the same enterprise accounts for ≥10%)
The first round: Except for the one company with the lowest weighted quotation in this group, the one with the lowest decline in the company's decline is eliminated, and the remaining companies enter the second round.
Companies with a decline of ≥45% will not be eliminated.
Companies with a decline of ≥45% will not be eliminated.
The second round: Except for the one company with the lowest weighted quotation in this group, the one company that ranks the lowest in decline is eliminated, and the remaining companies are planned to be selected.
Companies with a decline of ≥50% will not be eliminated.
Companies with a decline of ≥50% will not be eliminated.
(2) 2 sets of disposable cannula trocars (the total purchase quantity of the same enterprise accounts for <10%)
First round: Except for the two companies with the lowest and second-lowest weighted quotations in this group, the six companies that ranked the bottom six in decline are eliminated, and the remaining companies enter the second round.
The second round: Except for the two companies with the lowest and second-lowest weighted quotations in this group, the five companies that ranked the bottom five in decline are eliminated, and the remaining companies are planned to be selected.
Stapler
The staplers included in the centralized procurement scope this time are divided into three product types: hemorrhoid staplers, tubular/end-to-end staplers, open linear cutting staplers and nail cartridges.
1.
Hemorrhoid stapler
Hemorrhoid stapler
According to the proportion of the same company's total purchase quantity in the same type of products, it is divided into 2 groups according to the company.
Group 1 hemorrhoid stapler: The total purchase quantity of the same company accounts for ≥5%;
Two groups of hemorrhoid staplers: The total purchase quantity of the same enterprise accounts for less than 5%.
Enterprise proposed to be selected
① 1 set of hemorrhoid stapler (the total purchase quantity of the same enterprise accounts for ≥5% )
The first round: Except for the one company with the lowest weighted quotation in this group, the two companies that ranked the bottom two in decline are eliminated, and the remaining companies enter the second round.
Companies with a decline of ≥ 75% will not be eliminated.
Companies with a decline of ≥ 75% will not be eliminated.
The second round: Except for the one company with the lowest weighted quotation in this group, the one company with the lowest decline in the list of companies will be eliminated, and the remaining companies will be selected.
Companies with a decline of ≥80% will not be eliminated.
Companies with a decline of ≥80% will not be eliminated.
② 2 sets of hemorrhoid staplers (the total purchase quantity of the same enterprise accounts for <5% )
The first round: Except for the two companies with the lowest and second-lowest weighted quotations in this group, the eight companies that ranked the bottom eight in decline are eliminated, and the remaining companies enter the second round.
The second round: Except for the two companies with the lowest and second-lowest weighted quotations in this group, the 7 companies in the bottom seven of the bottom seven companies are eliminated, and the remaining companies are planned to be selected.
2.
Tubular/ end -to- end stapler
Tubular/ end -to- end stapler
According to the proportion of the same company's total purchase quantity in the same type of products, it is divided into 2 groups according to the company.
Tubular/end-to-end stapler 1 group: The total purchase quantity of the same enterprise accounts for ≥5%;
2 sets of tubular/end-to-end staplers: The total purchase quantity of the same company accounts for <5%.
Enterprise proposed to be selected
① 1 set of tubular/ end -to- end stapler (the total purchase quantity of the same enterprise accounts for ≥5% )
The first round: Except for the one company with the lowest weighted quotation in this group, the two companies that ranked the bottom two in decline are eliminated, and the remaining companies enter the second round.
Companies with a decline of ≥45% will not be eliminated.
Companies with a decline of ≥45% will not be eliminated.
The second round: Except for the one company with the lowest weighted quotation in this group, the one company that ranks the lowest in decline is eliminated, and the remaining companies are planned to be selected.
Companies with a decline of ≥50% will not be eliminated.
Companies with a decline of ≥50% will not be eliminated.
②Two sets of tubular/ end -to- end staplers (the same company’s total purchase quantity accounts for <5% )
First round: Except for the two companies with the lowest and second-lowest weighted quotations in this group, the six companies that ranked the bottom six in decline are eliminated, and the remaining companies enter the second round.
The second round: Except for the two companies with the lowest and second lowest weighted quotations in this group, the 6 companies that ranked the bottom six in decline are eliminated, and the remaining companies are planned to be selected.
3.
Open linear cutting stapler and nail box
Open linear cutting stapler and nail box
According to the total purchase quantity of the same company (calculated by the purchase quantity of the stapler) in the same type of products, it is divided into 2 groups according to the company.
Open linear stapler 1 group: The total purchase quantity of the same enterprise accounts for ≥10%;
Two sets of open linear staplers: The total purchase quantity of the same enterprise accounts for less than 10%.
Enterprise proposed to be selected
① 1 set of open linear cutting stapler (the total purchase quantity of the same enterprise accounts for ≥10%)
First round: Eliminate the one company in the lowest ranking of the decline in this group, and the remaining companies enter the second round.
Companies with a decline of ≥45% will not be eliminated.
Companies with a decline of ≥45% will not be eliminated.
The second round: Eliminate one company in the lowest ranking of this group of companies in decline, and the remaining companies are planned to be selected.
Companies with a decline of ≥50% will not be eliminated.
Companies with a decline of ≥50% will not be eliminated.
② 2 sets of open linear cutting stapler (the same company’s total purchase quantity accounts for <10%)
First round: Eliminate the five companies in the bottom five of this group, and the remaining companies enter the second round.
The second round: Eliminate the 4 companies in the bottom four of this group of companies in decline, and the remaining companies are planned to be selected.
Dural (spinal) membrane patch
Dural (spinal) membrane patch does not distinguish between bidding groups.
Enterprise proposed to be selected
The first round: Eliminate the three companies in the bottom three of this group, and the remaining companies enter the second round.
Companies with a decline of ≥65% will not be eliminated.
Companies with a decline of ≥65% will not be eliminated.
The second round: Eliminate the two companies in the bottom two companies in this group, and the remaining companies are planned to be selected.
Companies with a decline of ≥70% will not be eliminated.
Companies with a decline of ≥70% will not be eliminated.
Inguinal hernia patch
The inguinal hernia prostheses included in the centralized procurement scope this time are divided into three product types: plain films, three-dimensional films, and mesh plugs.
Divide into 3 groups according to product type.
Inguinal hernia patch 1 group: plain film products.
Inguinal hernia patch 2 groups: three-dimensional film products.
Inguinal hernia patch 3 groups: mesh plug products.
Enterprise proposed to be selected
(1 ) 1 group of inguinal hernia patch (plain products)
The first round: Eliminate the six companies in the bottom six of this group, and the remaining companies enter the second round.
Companies with a decline of ≥45% will not be eliminated.
Companies with a decline of ≥45% will not be eliminated.
The second round: Eliminate the five companies in the bottom five of this group of companies in decline, and the remaining companies are planned to be selected.
Companies with a decline of ≥50% will not be eliminated.
Companies with a decline of ≥50% will not be eliminated.
(2 ) 2 groups of inguinal hernia patch (three-dimensional film product)
The first round: Eliminate the three companies in the bottom three of this group, and the remaining companies enter the second round.
Companies with a decline of ≥45% will not be eliminated.
Companies with a decline of ≥45% will not be eliminated.
The second round: Eliminate the two companies in the bottom two companies in this group, and the remaining companies are planned to be selected.
Companies with a decline of ≥50% will not be eliminated.
Companies with a decline of ≥50% will not be eliminated.
(3 ) 3 groups of inguinal hernia patches (mesh plug products)
The first round: Eliminate the five companies in the bottom five of this group, and the remaining companies enter the second round.
Companies with a decline of ≥45% will not be eliminated.
Companies with a decline of ≥45% will not be eliminated.
The second round: Eliminate the four companies in the bottom four of this group of companies in decline, and the remaining companies are planned to be selected.
Companies with a decline of ≥50% will not be eliminated.
Companies with a decline of ≥50% will not be eliminated.
Medical Network, April 13 News On April 12, the Joint Procurement Center for Pharmaceutical Devices of Fujian Province issued a notice on publicly soliciting opinions on the "Fujian Province Second Batch of Medical Consumables Centralized Procurement Documents (Draft for Solicitation of Comments)".
Documents show that Fujian Province intends to use dual-chamber cardiac pacemakers, coronary dilatation balloons, single-focus intraocular lenses, disposable trocars, staplers, dural (spine) patches, inguinal hernia patches, etc.
7 Concentrated purchases of similar medical consumables.
Documents show that Fujian Province intends to use dual-chamber cardiac pacemakers, coronary dilatation balloons, single-focus intraocular lenses, disposable trocars, staplers, dural (spine) patches, inguinal hernia patches, etc.
7 Concentrated purchases of similar medical consumables.
It is worth noting that in 2020, Fujian Province will carry out centralized procurement of five varieties including ultrasonic scalpel, primary replacement artificial total hip joint, primary replacement artificial knee joint, closed vein indwelling needle and analgesic pump.
These four types of medical consumables have an average decrease of 52.
86% compared with the current purchase prices in Fujian Province.
It is estimated that medical expenses can be saved by 280 million yuan a year.
These four types of medical consumables have an average decrease of 52.
86% compared with the current purchase prices in Fujian Province.
It is estimated that medical expenses can be saved by 280 million yuan a year.
This time, Fujian Province has carried out a centralized procurement of 7 types of medical consumables.
The selection rules for each category of medical consumables are different.
Enterprises have two rounds of quotation opportunities and are eliminated in groups; products that have registered but invalid quotations account for the elimination index; each group The ranking is based on the decline of the registered products; when the product declines are the same, the products with low quotations and large pharmnet.
com.
cn/news/yyzb/" target="_blank">purchases in Fujian Province will be given priority.
Among them, only the inguinal hernia patch does not distinguish the bidding group.
The selection rules for each category of medical consumables are different.
Enterprises have two rounds of quotation opportunities and are eliminated in groups; products that have registered but invalid quotations account for the elimination index; each group The ranking is based on the decline of the registered products; when the product declines are the same, the products with low quotations and large pharmnet.
com.
cn/news/yyzb/" target="_blank">purchases in Fujian Province will be given priority.
Among them, only the inguinal hernia patch does not distinguish the bidding group.
In addition, the purchase cycle and purchase agreement are the same.
The procurement cycle is one year, and can be extended according to the actual situation after expiration, and the renewal cycle is one year; if the agreed procurement volume of the year is completed in advance during the procurement cycle, the selected companies should still supply at the selected price until the expiration of the procurement cycle; During the procurement cycle, the relevant medical consumables categories are included in the national organization for centralized procurement, and the national procurement results will be implemented as required.
The procurement cycle is one year, and can be extended according to the actual situation after expiration, and the renewal cycle is one year; if the agreed procurement volume of the year is completed in advance during the procurement cycle, the selected companies should still supply at the selected price until the expiration of the procurement cycle; During the procurement cycle, the relevant medical consumables categories are included in the national organization for centralized procurement, and the national procurement results will be implemented as required.
The grouping and selection rules of the second batch of 7 major consumables in Fujian Province are as follows:
Heart dual-chamber pacemaker
The dual-chamber cardiac pacemakers included in the centralized procurement scope this time are divided into two product types: full-body compatible MRI and non-whole-body compatible MRI.
Divided into 3 groups.
Among them, the whole body compatible MRI products are one group; the non-whole body compatible MRI products are divided into two groups according to the purchase quantity in the same type of products:
Divided into 3 groups.
Among them, the whole body compatible MRI products are one group; the non-whole body compatible MRI products are divided into two groups according to the purchase quantity in the same type of products:
Pacemaker Group 1: Compatible with MRI products throughout the body.
Pacemaker Group 2: Products that are not whole-body compatible with MRI and the purchase quantity accounts for ≥10%.
3 groups of pacemakers: products that are not whole-body compatible with MRI and whose purchase quantity accounts for less than 10%.
Product to be selected
(1) 1 set of pacemakers (full-body compatible MRI products)
The first round: Except for the product with the lowest quotation in this group, the one with the lowest product decline is eliminated, and the remaining products enter the second round.
Products with a product decline of ≥25% will not be eliminated.
(In the case of the same product quotation, the order of retention shall be determined according to the following rules: ①The product with a large decline has priority; ②The province with a large purchase quantity has priority.
The same below.
)
Products with a product decline of ≥25% will not be eliminated.
(In the case of the same product quotation, the order of retention shall be determined according to the following rules: ①The product with a large decline has priority; ②The province with a large purchase quantity has priority.
The same below.
)
The second round: Except for the product with the lowest quotation in this group, the product with the lowest drop rate is eliminated, and the remaining products are planned to be selected.
Products with a product decline of ≥30% will not be eliminated.
Products with a product decline of ≥30% will not be eliminated.
(2) 2 sets of pacemakers (products that are not whole-body compatible with MRI and whose purchase quantity accounts for ≥10%)
The first round: Except for the product with the lowest quotation in this group, the one with the lowest product decline is eliminated; the remaining products enter the second round.
Products with a product decline of ≥30% will not be eliminated.
Products with a product decline of ≥30% will not be eliminated.
The second round: Except for the product with the lowest quotation in this group, the product with the lowest drop rate is eliminated, and the remaining products are planned to be selected.
Products with a product decline of ≥35% will not be eliminated.
Products with a product decline of ≥35% will not be eliminated.
(3) 3 sets of pacemakers (products that are not whole-body compatible with MRI and whose purchase quantity accounts for less than 10%)
First round: Except for the one product with the lowest quotation in this group, the three products that ranked the bottom three in decline are eliminated, and the remaining products enter the second round.
Second round: Except for the one product with the lowest quotation in this group, the three products that ranked the bottom three in decline are eliminated, and the remaining products are planned to be selected.
Coronary dilatation balloon
The coronary dilatation balloons included in the centralized procurement scope this time are divided into two product types: rapid exchange pre-expansion balloon and quick exchange post-expansion balloon.
Divided into 2 groups according to product type:
Divided into 2 groups according to product type:
Coronary dilatation balloon group 1: quick-exchange pre-dilatation balloon products.
Coronary dilatation balloon 2 groups: rapid exchange type posterior dilatation balloon products.
Product to be selected
(1 ) 1 set of coronary dilatation balloon (quick exchange pre-dilatation balloon product)
The first round: Except for the two products with the lowest and second lowest quotations in this group, the five products that ranked the bottom five in decline are eliminated, and the remaining products enter the second round.
Products with a product decline of ≥80% will not be eliminated.
(In the case of the same product quotation, the order of retention shall be determined according to the following rules: ①The product with a large decline has priority; ②The province with a large purchase quantity has priority.
The same below.
)
Products with a product decline of ≥80% will not be eliminated.
(In the case of the same product quotation, the order of retention shall be determined according to the following rules: ①The product with a large decline has priority; ②The province with a large purchase quantity has priority.
The same below.
)
The second round: Except for the two products with the lowest and the second lowest quotation in this group, the five products that ranked the bottom five in decline are eliminated, and the remaining products are planned to be selected.
Products with a product decline of ≥85% will not be eliminated.
Products with a product decline of ≥85% will not be eliminated.
(2) 2 sets of coronary dilatation balloons (fast-exchange post-expansion balloon products) first round: Except for the 2 lowest and second lowest quotations in this group, the 3 products that ranked the bottom three in decline are eliminated.
The remaining products enter the second round.
Products with a product decline of ≥80% will not be eliminated.
The remaining products enter the second round.
Products with a product decline of ≥80% will not be eliminated.
The second round: Except for the two products with the lowest and the second lowest quotations in this group, the three products that ranked the bottom three in decline are eliminated, and the remaining products are planned to be selected.
Products with a product decline of ≥85% will not be eliminated.
Products with a product decline of ≥85% will not be eliminated.
Intraocular lens
The single-focus intraocular lens included in the scope of centralized procurement this time is divided into two product types: single-focus aspheric surface and single-focus spherical surface.
Divided into 2 groups according to product type:
Divided into 2 groups according to product type:
Intraocular lens group 1: single focus-aspherical products.
Two groups of intraocular lenses: single focus-spherical products.
Product to be selected
(1) 1 group of intraocular lens (single focus-aspherical product)
The first round: Except for the two products with the lowest and second lowest quotations in this group, the eight products that ranked the bottom eight in decline are eliminated, and the remaining products enter the second round.
Products with a product decline of ≥45% will not be eliminated.
(In the case of the same product quotation, the order of retention shall be determined according to the following rules: ①The product with a large decline has priority; ②The province with a large purchase quantity has priority.
The same below.
)
Products with a product decline of ≥45% will not be eliminated.
(In the case of the same product quotation, the order of retention shall be determined according to the following rules: ①The product with a large decline has priority; ②The province with a large purchase quantity has priority.
The same below.
)
The second round: Except for the 2 products with the lowest and the second lowest quotation in this group, the 7 products in the bottom seven of the bottom seven products are eliminated, and the remaining products are planned to be selected.
Products with a product decline of ≥50% will not be eliminated.
Products with a product decline of ≥50% will not be eliminated.
(2) 2 sets of intraocular lens (single focus-spherical product)
The first round: Except for the two products with the lowest and second lowest quotations in this group, the six products that ranked the bottom six in decline are eliminated, and the remaining products enter the second round.
Products with a product decline of ≥45% will not be eliminated.
Products with a product decline of ≥45% will not be eliminated.
The second round: Except for the 2 products with the lowest and the second lowest quotation in this group, 6 products in the bottom six rankings of product decline are eliminated, and the remaining products are planned to be selected.
Products with a product decline of ≥50% will not be eliminated.
Products with a product decline of ≥50% will not be eliminated.
Disposable cannula trocar
Disposable cannula trocars (excluding single-hole multi-channel trocars) are divided into 2 groups according to the company's total purchase quantity in the same type of products.
One set of disposable cannula puncture: The total purchase quantity of the same enterprise accounts for ≥10%.
Two sets of disposable cannula trocars: The total purchase quantity of the same enterprise accounts for less than 10%.
Enterprise proposed to be selected
(1) One set of disposable cannula puncture device (the total purchase quantity of the same enterprise accounts for ≥10%)
The first round: Except for the one company with the lowest weighted quotation in this group, the one with the lowest decline in the company's decline is eliminated, and the remaining companies enter the second round.
Companies with a decline of ≥45% will not be eliminated.
Companies with a decline of ≥45% will not be eliminated.
The second round: Except for the one company with the lowest weighted quotation in this group, the one company that ranks the lowest in decline is eliminated, and the remaining companies are planned to be selected.
Companies with a decline of ≥50% will not be eliminated.
Companies with a decline of ≥50% will not be eliminated.
(2) 2 sets of disposable cannula trocars (the total purchase quantity of the same enterprise accounts for <10%)
First round: Except for the two companies with the lowest and second-lowest weighted quotations in this group, the six companies that ranked the bottom six in decline are eliminated, and the remaining companies enter the second round.
The second round: Except for the two companies with the lowest and second-lowest weighted quotations in this group, the five companies that ranked the bottom five in decline are eliminated, and the remaining companies are planned to be selected.
Stapler
The staplers included in the centralized procurement scope this time are divided into three product types: hemorrhoid staplers, tubular/end-to-end staplers, open linear cutting staplers and nail cartridges.
1.
Hemorrhoid stapler
Hemorrhoid stapler
According to the proportion of the same company's total purchase quantity in the same type of products, it is divided into 2 groups according to the company.
Group 1 hemorrhoid stapler: The total purchase quantity of the same company accounts for ≥5%;
Two groups of hemorrhoid staplers: The total purchase quantity of the same enterprise accounts for less than 5%.
Enterprise proposed to be selected
① 1 set of hemorrhoid stapler (the total purchase quantity of the same enterprise accounts for ≥5% )
The first round: Except for the one company with the lowest weighted quotation in this group, the two companies that ranked the bottom two in decline are eliminated, and the remaining companies enter the second round.
Companies with a decline of ≥ 75% will not be eliminated.
Companies with a decline of ≥ 75% will not be eliminated.
The second round: Except for the one company with the lowest weighted quotation in this group, the one company with the lowest decline in the list of companies will be eliminated, and the remaining companies will be selected.
Companies with a decline of ≥80% will not be eliminated.
Companies with a decline of ≥80% will not be eliminated.
② 2 sets of hemorrhoid staplers (the total purchase quantity of the same enterprise accounts for <5% )
The first round: Except for the two companies with the lowest and second-lowest weighted quotations in this group, the eight companies that ranked the bottom eight in decline are eliminated, and the remaining companies enter the second round.
The second round: Except for the two companies with the lowest and second-lowest weighted quotations in this group, the 7 companies in the bottom seven of the bottom seven companies are eliminated, and the remaining companies are planned to be selected.
2.
Tubular/ end -to- end stapler
Tubular/ end -to- end stapler
According to the proportion of the same company's total purchase quantity in the same type of products, it is divided into 2 groups according to the company.
Tubular/end-to-end stapler 1 group: The total purchase quantity of the same enterprise accounts for ≥5%;
2 sets of tubular/end-to-end staplers: The total purchase quantity of the same company accounts for <5%.
Enterprise proposed to be selected
① 1 set of tubular/ end -to- end stapler (the total purchase quantity of the same enterprise accounts for ≥5% )
The first round: Except for the one company with the lowest weighted quotation in this group, the two companies that ranked the bottom two in decline are eliminated, and the remaining companies enter the second round.
Companies with a decline of ≥45% will not be eliminated.
Companies with a decline of ≥45% will not be eliminated.
The second round: Except for the one company with the lowest weighted quotation in this group, the one company that ranks the lowest in decline is eliminated, and the remaining companies are planned to be selected.
Companies with a decline of ≥50% will not be eliminated.
Companies with a decline of ≥50% will not be eliminated.
②Two sets of tubular/ end -to- end staplers (the same company’s total purchase quantity accounts for <5% )
First round: Except for the two companies with the lowest and second-lowest weighted quotations in this group, the six companies that ranked the bottom six in decline are eliminated, and the remaining companies enter the second round.
：、 2 ， 6 ，。
3.
（），2。
1 ：≥10%；
2 ：<10%。
① 1 （≥10%）
： 1 ，。≥45%。
： 1 ，。≥50%。
② 2 （<10%）
： 5 ，。
： 4 ，。
（）
（）。
：3，。≥65%。
：2，。≥70%。
，、、。
3。
1：。
2：。
3：。
（1）1（）
：6，。≥45%。
：5，。≥50%。
（2）2（）
：3，。≥45%。
：2，。≥50%。
（3）3（）
：5，。≥45%。
：4，。≥50%。
413 412，《（）》。，、、、、、（）、7。
，2020、、、5。452.
86%，2.
8。
86%，2.
8。
7，，，；；；，pharmnet.
com.
cn/news/yyzb/" target="_blank">。，。
pharmnet. com.
cn/news/yyzb/" target="_blank">。，。
com.
cn/news/yyzb/" target="_blank">pharmnet.
com.
cn/news/yyzb/" target="_blank">
，。，，；，，；，。
7：
7： ，MRI、MRI。3。MRI；MRI：
1：MRI。
2：MRI≥10%。
3：MRI<10%。
（1）1（MRI）
：1，1，。≥25%。（，：①；②。。）
：1，1，。≥30%。
（2）2（ MRI ≥10%）
：1，1；。≥30%。
：1，1，。≥35%。
（3）3（ MRI <10%）
： 1 ， 3 ，。
： 1 ， 3 ，。
，、。2：
1：。
2：。
（1）1（）
（1）1（） ：、2，5，。≥80%。（，：①；②。。）
：、2，5，。≥85%。
（2）2（）：、2，3，。≥80%。
：、2，3，。≥85%。
，、。2：
1：-。
2：-。
（1）1（-）
：、2，8，。≥45%。（，：①；②。。）
：、2，7，。≥50%。
（2）2（-）
：、2，6，。≥45%。
：、2，6，。≥50%。
（），2。
1 ：≥10%。
2 ：<10%。
（1）1（≥10%）
：1，1，。≥45%。
：1，1，。≥50%。
（2）2（<10%）
：、2，6，。
：、2，5，。
，、/、。
1.
1. ，2。
1：≥5%；
2：<5%。
①1（≥5%）
①1（≥5%） ：1， 2，。≥ 75%。
： 1 ，1，。≥80%。
②2（<5%）
②2（<5%） ：、2，8，。
：、2， 7，。
2.
/
2. /
/
，2。
/ 1 ：≥5%；
/ 2 ：<5%。
①/1（≥5%）
①/1（≥5%） ：1，2，。≥45%。
：1，1，。≥50%。
②/2（<5%）
②/2（<5%） First round: Except for the two companies with the lowest and second-lowest weighted quotations in this group, the six companies that ranked the bottom six in decline are eliminated, and the remaining companies enter the second round.
The second round: Except for the two companies with the lowest and second lowest weighted quotations in this group, the 6 companies that ranked the bottom six in decline are eliminated, and the remaining companies are planned to be selected.
3.
Open linear cutting stapler and nail box
3. Open linear cutting stapler and nail box
Open linear cutting stapler and nail box
According to the total purchase quantity of the same company (calculated by the purchase quantity of the stapler) in the same type of products, it is divided into 2 groups according to the company.
Open linear stapler 1 group: The total purchase quantity of the same enterprise accounts for ≥10%;
Two sets of open linear staplers: The total purchase quantity of the same enterprise accounts for less than 10%.
Enterprise proposed to be selected
Enterprise proposed to be selected ① 1 set of open linear cutting stapler (the total purchase quantity of the same enterprise accounts for ≥10%)
First round: Eliminate the one company in the lowest ranking of the decline in this group, and the remaining companies enter the second round.
Companies with a decline of ≥45% will not be eliminated.
Companies with a decline of ≥45% will not be eliminated.
The second round: Eliminate one company in the lowest ranking of this group of companies in decline, and the remaining companies are planned to be selected.
Companies with a decline of ≥50% will not be eliminated.
Companies with a decline of ≥50% will not be eliminated.
② 2 sets of open linear cutting stapler (the same company’s total purchase quantity accounts for <10%)
First round: Eliminate the five companies in the bottom five of this group, and the remaining companies enter the second round.
The second round: Eliminate the 4 companies in the bottom four of this group of companies in decline, and the remaining companies are planned to be selected.
Dural (spinal) membrane patch
Dural (spinal) membrane patch Dural (spinal) membrane patch does not distinguish between bidding groups.
Enterprise proposed to be selected
Enterprise proposed to be selected The first round: Eliminate the three companies in the bottom three of this group, and the remaining companies enter the second round.
Companies with a decline of ≥65% will not be eliminated.
Companies with a decline of ≥65% will not be eliminated.
The second round: Eliminate the two companies in the bottom two companies in this group, and the remaining companies are planned to be selected.
Companies with a decline of ≥70% will not be eliminated.
Companies with a decline of ≥70% will not be eliminated.
Inguinal hernia patch
Inguinal hernia patch The inguinal hernia prostheses included in the centralized procurement scope this time are divided into three product types: plain films, three-dimensional films, and mesh plugs.
Divide into 3 groups according to product type.
Inguinal hernia patch 1 group: plain film products.
Inguinal hernia patch 2 groups: three-dimensional film products.
Inguinal hernia patch 3 groups: mesh plug products.
Enterprise proposed to be selected
Enterprise proposed to be selected (1 ) 1 group of inguinal hernia patch (plain products)
(1 ) 1 group of inguinal hernia patch (plain products) The first round: Eliminate the six companies in the bottom six of this group, and the remaining companies enter the second round.
Companies with a decline of ≥45% will not be eliminated.
Companies with a decline of ≥45% will not be eliminated.
The second round: Eliminate the five companies in the bottom five of this group of companies in decline, and the remaining companies are planned to be selected.
Companies with a decline of ≥50% will not be eliminated.
Companies with a decline of ≥50% will not be eliminated.
(2 ) 2 groups of inguinal hernia patch (three-dimensional film product)
(2 ) 2 groups of inguinal hernia patch (three-dimensional film product) The first round: Eliminate the three companies in the bottom three of this group, and the remaining companies enter the second round.
Companies with a decline of ≥45% will not be eliminated.
Companies with a decline of ≥45% will not be eliminated.
The second round: Eliminate the two companies in the bottom two companies in this group, and the remaining companies are planned to be selected.
Companies with a decline of ≥50% will not be eliminated.
Companies with a decline of ≥50% will not be eliminated.
(3 ) 3 groups of inguinal hernia patches (mesh plug products)
(3 ) 3 groups of inguinal hernia patches (mesh plug products) The first round: Eliminate the five companies in the bottom five of this group, and the remaining companies enter the second round.
Companies with a decline of ≥45% will not be eliminated.
Companies with a decline of ≥45% will not be eliminated.
The second round: Eliminate the four companies in the bottom four of this group of companies in decline, and the remaining companies are planned to be selected.
Companies with a decline of ≥50% will not be eliminated.
Companies with a decline of ≥50% will not be eliminated.
