The difference between the water bath thermostatic shaker and the air bath thermostatic shaker

1, water bath constant temperature shaker: also known as water bath constant temperature shaker, is a temperature controllable constant temperature water bath and oscillator combined with biochemical instruments, mainly suitable for colleges and universities, medical, petrochemical, health and epidemic prevention, environmental monitoring and other scientific research departments for biological, biochemical, cells, bacteria and other liquid and solid compounds oscillation culture, the use of water before running
.

2, air bath constant temperature shaker: also known as air bath constant temperature shaker, there is a lighting device in the workshop for easy observation, oscillation incubator is also known as full temperature shaker, the use of fully enclosed compressor, large refrigeration capacity, the box is equipped with fans and devices, forced air convection, temperature distribution is more uniform
.

Since this type of shaker is a gas as the heating medium, there is no need to add water
when using.

In the process of use, such as the discovery of equipment accompanied by noise and odor, mostly is the motor abnormal operation, the precursor to failure, must be found in time and find out the cause to be eliminated, otherwise it will delay the opportunity, expand the fault, resulting in a major event
of burning the motor.

In addition, the following precautions still need to be noted: 1, should be placed horizontally on the plane, if uneven, it will emit abnormal sound, and accelerate the constant temperature shaker shaft failure, or even break
.

2.
During operation, please do not move
at will.

During operation, it is strictly forbidden to extend the handle or object into the wall of the chamber to avoid injuring people and damaging the equipment
.

3.
During operation, if the flask beaker is damaged, it should be stopped immediately, and the damaged fragments and liquids should be removed in time, and the acidic and alkaline liquid will corrode the shaker cavity, and the inflow of electricity will cause short circuit, burns and other serious consequences
.

4.
In order to dissipate heat in time during operation, please dissipate heat behind the instrument at least 10CM or more from the
wall.